i used my trick to mod a ciggeret lighter and put 3 of them together, this was the result. please comment!
i modded my X7 tippmann paintball marker to fire ping pong balls, and finaly after like 8 tries to hit the dang bottle, i hit it and it was a good take. i will submit a better video on how to make it later.
me firing an M4, a fully automatic assault rifle, a better version of the M16. TRUST ME, IT IS NOT LIKE IT IS IN VIDEO GAMES AND MOVIES!!!! It is a lot harder to keep control of the weapon when firing full auto than video games make it out to be. i shot this gun and a 552 commando assault rifle which was also full auto. It is really hard to be accurate with these weapons when in full auto, even with an instructor there, telling me how to hold it and how to stand and stuff. most people would be knocked on their ass if fireing this without instruction!!
I SHOW YOU HOW TO MAKE A IMPACT EXPLOSIVE PAINTBALL, FIRE IT FROM A PAINTBALL GUN AT AROUND 280 FPS AND IT WILL EXPLODE ON IMPACT!!!
HERE I SHOW YOU HOW TO MAKE A FLAMETHROWER OUT OF A REGULAR CIGGERETTE LIGHTER!! ONE PROBLEM WITH IT, IT ONLY LASTS ABOUT 4 SECONDS. BUT IT IS 4 SECONDS OF FREAKING SWEETNESS
i did the butane thing again but i put the firestarter farther away so it did not go out when all the gas was released, but all the gas did not get released at once. I only put one hole in it so all the butane had to come out of one hole the size of a 22. round. The can was full and what i need to do is make a bigger hole.
I filled a small squirt pitol with colemans white gas camp fuel, and used a lighter in front of it. that bit in the end, that was my squirt gun catching on fire, so i did the smart thing and dropped it as soon as i knew i couldn't put out while holding it. CAUTION: BE CAREFUL WITH ANYTHING THAT CAN SPONTANEOUSLY COMBUST!!!!
i tried my rocket pistol with a small rocket and firing it with the launch pad used for rocketry, after like 10 tries and 50,000 mosquitos in my face later, i got it to work, i am sooo going back to using safety fuse.
yaaaaa.....title say's it all
PLEASE READ: i used gorrilla tape and taped a rod from LOWE'S, that fits the mini rockets that i got from wal-mart, that uses AT-10 model rocket engines. i taped the rod to a rubber band gun and drilled a hole an inch above dead center of a square sheet of LEXAN and used it as a shield from the hot gases from the rocket, and used a safety fuse in the back and jammed a small piece of paper in the hole to keep the fuse in, you can also just use the launch pad that you should use to launch rocket with, they can be bought in a kit at wal-mart. You can see the launch, but you can't see the rocket very well after it leaves the platform, but it went all the way down that grassy road and to the trees. i will be releasing a lot more rocket related stuff in the future. if you like this, subscribe to me, because i have a lot more where that came from!