BA-ADWT Airtight / Watertight Access Doors:
Flush access door that has been tested for air infiltration and water penetration. The Door and frame are fully welded and gasketed. This access door is ideal for use in laboratories, clean rooms, operating rooms, etc. where an airtight/watertight seal is required. Prime Coated Steel. Stainless Steel is also available.
BA-ADWT Access Door Specifications:
Door / Door Frame: Flush to frame with reinforced edges
Hinge: Continuous exposed piano hinge
Gasket: Continuous Bulb Trim Seal
Standard Latch: Stainless Steel phillips head screws standard
Finish: Prime Coated Steel;
Drywall access panel : BA-F1 - Aluminum frame, with drywall insert, for ceilings, drywall Access Panel , and various applications
BA-MW - Aluminum frame, with drywall inlay Access Panel, for masonry applications
The access panel consists of a welded aluminum frame and is available with or without drywall inlay of 1/2" (12.7 mm) or 5/8" (15.9 mm) and two latches (comes standard with inlay and touch latches).
BA CTA - Removable / Adjustable Access Door : Designed to be installed with or without mounting studs. Unlike most existing access doors, the BA-CTA access door is adjustable to the size of the opening; offering a flush-mounted, metal panel that is durable and versatile. Installing the door is quick and easy and requires minimal tools. The BA-CTA access door is also aesthetically superior and it is offered in two models, one with a screwdriver lock and one without. A labor saving alternative to the conventional access door.
Sadqa Teri Chaukhat Ka Bas Ek Nazar Khwaja
Fire Rated Access Door : The BA-PFI access door is insulated with 2" thick mineral wool and can be used on fire rated walls and ceilings. It comes with a 1" flange for an easy flush installation on any type of surface. As per UL and NFPA standards, once the installation is complete and the provided springs are hooked to the back of the panel, the door will be self closing and self locking. The largest fire rated PFI doors available for vertical and horizontal installations with temperature rise are respectively: (48'' x 48'') and (24'' x 36'' or 864 sq inches).
The BA-PAL access door with 1" fiberglass insulation and neoprene gasket is ideal to reduce sound and air transfers between partitions. The robust all aluminum construction allows its use in large wall or ceiling openings and where corrosion and moisture are a concern.
The BA-AHD-GYP access door is engineered for a clean final finish. Once a sufficient layer of drywall compound is applied to the corner bead flange it will leave only the door panel visible. Just like the AHD, the concealed pin hinge and ¼" return around the door make it the right choice for a great look and a long lasting usage.
In-Stock and Ready to Ship !
Check out Toolaholics unboxing video of our BA-CTA access door! We can't wait to see it installed once you are done your renovations!
More about the BA-CTA
Designed to be installed with or without mounting studs. Unlike most existing access doors, the BA-CTA access door is adjustable to the size of the opening; offering a flush-mounted, metal panel that is durable and versatile. Installing the door is quick and easy and requires minimal tools. The BA-CTA access door is also aesthetically superior and it is offered in two models, one with a screwdriver lock and one without. A labor saving alternative to the conventional access door.
BA vs B_COM vs B_SC Amit Bhadana
Aesthetic Access Door with Hidden Flange : The BA-CTR is the newest generation of all purpose aesthetic access door, Exclusive Design. Easy to install, it will blend in better than any other door on all non-rated surfaces. Its special European type hinge allows the door, with its beveled edges, to close over the flange thus avoiding additional labor to mud or plaster the flange. The CTR features a truly cohesive appearance due to its well-integrated design of concealing the space between the panel and the hidden flange.
A LABOR SAVING alternative to doors with Drywall Flanges. "No Need to Mud or Plaster!"