Results for: boating light Search Results
Family Filter:
2:39
*******www.magnalight**** Larson Electronics Magnalight Announces Free Shipping on Orders over $50 Larson Electronics’ Magnalight**** announces they have lowered the limit on free shipping purchases from two hundred dollars to fifty dollars for the week of Thanksgiving. Larson Electronics’ now offers free shipping on orders over $50 for the week of Thanksgiving. Purchases of Golight remote control lights, HID hunting lights, and LED boat lights exceeding $50 and qualify for the free shipping offer. “As hunting seasons begin, our market expands beyond explosion proof lighting and power distribution to include remote control searchlights and handheld spotlights for hunters,” said Rob Bresnahan with Larson Electronics’ Magnalight****. “Many of these lighting products are ideal gifts for men, so we are tailoring our offering to appeal to that consumer market demand this holiday season.” Larson Electronics offers a wide variety of hunting lights, including 12/24 volt spotlights, camouflage remote control lights and HID and LED handheld hunting spotlight. You can learn more about Larson Electronics at Magnalight**** or 1-800-369-6671.
20 Nov 2012
169
Share Video

0:42
*******www.magnalight****/p-48616-high-intensity-led-boat-light--24-10-watt-leds--extreme-environment--9-46vdc--20640-lumen.aspx Buy American Compliant The LEDPB10W-240E LED Boat Light is IP68 Rated waterproof to three meters, features a thick aluminum housing, stainless steel mounting hardware and an impact resstant polycarbonite lens, making it ideal for marine applications where corrosion resistance and durability are critical. A 20,640 lumen light output with low wattage and amp draw, 50,000 hour service life and 9 to 46 volt compatibility provides boat operators with a versatile and powerful LED lighting solution that outperforms halogen marine lamps while using far less power. The LEDPB10W-240E LED light bar from Magnalight produces 20,640 lumens of bright light while drawing only 240 watts 20 amps from a 12 volt electrical system. Twenty four CREE XLamp MC-E®10 watt LEDs producing 860 lumens each are paired with high purity optics to produce a 20 degree spread spot beam approximately 1500’ long by 180’ in width. We also offer floodlight versions with a 40 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as spreader and area lights. These LED light bars are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the demanding conditions found in marine environments. An integral Pulse Width Modulation controller, high output, low power requirements, high durability and versatile mounting options makes these LED light emitters a superior lighting solution for boats and marine applications where versatility, extreme durability and efficiency is needed. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. Durability: As well as unparalleled heat control, the LEDPB10W series of LED boat light bars from Magnalight also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and sealed against the intrusion of dust, dirt and humidity. The housings are thicker and heavier than standard LED light bars and formed from thick extruded aluminum, the mounting hardware is stainless steel to resist corrosion and oxidation and the lenses are unbreakable polycarbonate. The CREE XLamp MC-E® LEDs offer added resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. Magnalight**** Toll Free: 1-800-369-6671 Intl: 1-903-498-3364
7 Apr 2012
103
Share Video

0:43
*******www.magnalight****/p-48623-high-intensity-led-boat-light--8-10-watt-leds--6880-lumens--extreme-environment--9-46-vdc.aspx Buy American Compliant The LEDPB10W-80X2E LED Boat Light is IP68 rated waterproof to three meters, features a thick aluminum housing, stainless steel mounting hardware and an impact resistant polycarbonite lens, making it ideal for marine applications where corrosion resistance and durability are critical. 6,880 lumens of light output with low wattage and amp draw, 50,000 hour service life and 9 to 46 volt compatibility provides boat operators with a versatile and powerful LED lighting solution that outperforms halogen marine lamps while using far less power. The LEDPB10W-80X2E LED light bar from Magnalight produces 6,880 lumens of bright light while drawing only 80 watts 6.7 amps from a 12 volt electrical system. Eight CREE XLamp MC-E® ten watt LEDs producing 860 lumens each are arranged in two rows and paired with high purity optics to produce a 20 degree spread spot beam approximately 750' long by 70’ in width. We also offer floodlight versions with a 40 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as spreader and area lights. These LED light bars are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the demanding conditions found in marine environments. An integral Pulse Width Modulation controller, high output, low power requirements, high durability and versatile mounting options makes these LED light emitters a superior lighting solution for boats and marine applications where versatility, extreme durability and efficiency is needed. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. PWM Control: The PWM drivers in these units provide boaters with an extremely versatile lighting option. The pulse width modulation drivers provide the ability to tap into a provided input wire with an external pulse generator and adjust the duty cycle of the current being applied to the LEDs. Thus, you can connect an external dimmer, switch or pulse control and adjust the perceived output of the light, effectively causing the light to flash, dim or brighten to the desired levels. This ability makes these LED fixtures capable of acting as beacons and signal lights as well as all around lighting fixtures. Durability: As well as unparalleled heat control, the LEDPB10W series of LED boat light bars from Magnalight also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and sealed against the intrusion of dust, dirt and humidity. The housings are thicker and heavier than standard LED light bars and formed from thick extruded aluminum, the mounting hardware is stainless steel to resist corrosion and oxidation and the lenses are unbreakable polycarbonate. The CREE XLamp MC-E® LEDs offer added resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,000 hours of use. Magnalight**** Toll Free: 1-800-369-6671 Intl: 1-903-498-3364
7 Apr 2012
129
Share Video

0:43
*******www.magnalight****/p-48621-led-boat-light--6-10-watt-leds--5160-lumen--525l-x-80-spot-beam--extreme-environment.aspx Buy American Compliant The LEDPB10W-60E LED Boat Light is IP68 Rated waterproof to three meters, features a thick aluminum housing, stainless steel mounting hardware and an impact resstant polycarbonite lens, making it ideal for marine applications where corrosion resistance and durability are critical. A 5,160 lumen light output with low wattage and amp draw, 50,000 hour service life and 9 to 46 volt compatibility provides boat operators with a versatile and powerful LED lighting solution that outperforms halogen marine lamps while using far less power. The LEDPB10W-60E LED light bar from Magnalight produces 5,160 lumens of light while drawing only 60 watts 5 amps from a 12 volt electrical system. Six CREE XLamp MC-E® ten watt LEDs producing 860 lumens each are paired with high purity optics to produce a 20 degree spread spot beam approximately 525’ long by 80’ in width. We also offer floodlight versions with a 40 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as spreader and area lights. These LED light bars are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the demanding conditions found in marine environments. Magnalight**** Toll Free: 1-800-369-6671 Intl: 1-903-498-3364
7 Apr 2012
185
Share Video

0:47
*******www.magnalight****/p-48619-led-boat-light--4-10-watt-leds--450l-x-75w-spot-beam--3440-lumens--extreme-environment.aspx Buy American Compliant The LEDPB10W-40E LED Boat Light is IP68 Rated waterproof to three meters, features a thick aluminum housing, stainless steel mounting hardware and an impact resstant polycarbonite lens, making it ideal for marine applications where corrosion resistance and durability are critical. 3,440 lumens of light output with low wattage and amp draw, 50,000 hour service life and 9 to 46 volt compatibility provides boat operators with a versatile and powerful LED lighting solution that outperforms halogen marine lamps while using far less power. Magnalight**** Toll Free: 1-800-369-6671 Intl: 1-903-498-3364
7 Apr 2012
82
Share Video

1:17
bit.ly/​pOrxAb Great for home decorate, boat lighting, channel letters, symbols, accents, borders, architectural lighting, step lighting, car, truck decorative lighting, mood lighting, especially for narrow area lighting and more...
31 Aug 2011
978
Share Video

2:23
30-day free trial and free audiobook here: *******bit.ly/Audible--RatedRR Handheld M2 .50 Cal Machine Gun Click here to subscribe: *******goo.gl/mZDvQ Keep up with me and the projects I'm working on: Twitter: *******www.Twitter****/RichardRyan Facebook: *******www.Facebook****/RichardRyan Instagram: *******www.Instagram****/RichardRyan If you're interested in most of the shirts I wear... You can find them here: *******www.endoapparel**** The M2 Machine Gun or Browning .50 Caliber Machine Gun, currently manufactured by US Ordnance, is a heavy machine gun designed towards the end of World War I by John Browning. It is very similar in design to Browning's earlier M1919 Browning machine gun, which was chambered for the .30-06 cartridge. The M2 uses the much larger and much more powerful .50 BMG cartridge, which was developed alongside and takes its name from the gun itself (BMG standing for Browning Machine Gun). The M2 has been referred to as "Ma Deuce", as a GI phonetic slang or "the fifty" in reference to its caliber. The design has had many specific designations; the official designation for the current infantry type is Browning Machine Gun, Cal. .50, M2, HB, Flexible. It is effective against infantry, unarmored or lightly armored vehicles and boats, light fortifications and low-flying aircraft. The M2 has had the longest continuous service for a machine gun in the world.
14 Jan 2014
4893
Share Video

1:57
B&B's Ronn Moss takes you to Newport Beach, CA for the annual boat lights parade.
23 Jan 2013
113
Share Video

0:31
We carry eco-friendly solar lighting. Solar yard lamps, floodlights and spotlights. We have solar boat lights, solar flashlights, solar water features and solar chargers for phones, laptops and electronics. *******SolarFlairLighting****
10 Feb 2012
63
Share Video

0:32
There is a good reason to use your boat lights while fishing at night!
7 May 2010
121
Share Video