Results for: curt Search Results
Family Filter:
0:45
Custom hand carved Hawaiian Style Fish Hook Jewelry by Curt McManus in Kailua Kona Hi. Distributed by Tubemogul.
3 Jan 2010
201
Share Video

1:24
MOBILE , Ala. (Jan. 16, 2010) Cmdr. Michael Riley, gold crew commanding officer, and Cmdr Curt Renshaw, blue crew commanding officer, read their orders and assume command of the littoral combat ship USS Independence (LCS 2) during the ship's commissioning ceremony. The 417-foot Independence will be outfitted with reconfigurable payloads, called mission packages, which can be changed out quickly. These mission packages focus on three mission areas: mine counter measures, surface warfare and anti-submarine warfare. (U.S. Navy video/Released)
24 Feb 2011
286
Share Video

2:33
Every year Maintenance Engineering LTD has an annual Champagne cart hosted by President Curt Kesselring and Vice President Dennis Leno follow them on their New Years Eve Adventure through Maintenance Engineering's home office. http://www.me-dtc.com
26 Jan 2010
151
Share Video

1:21
Check out Maintenance Engineering's Snow Angels. The Maintenance Engineering Sales Managers, President Curt Kesselring, and VP Dennis Leno all make snow angels on January 8, 2010, in chilly Fargo, ND. Temperature was -9°F (yes, 9 below zero) at the time! One brave soul does it only in his gym shorts! Yikes! You guys rock! Maintenance Engineering video. Check us out at www.me-dtc.com
26 Jan 2010
237
Share Video

0:48
Maintenance Engineering's year end sales blow out in ends in a snow angel party and the local news channel 11 (KVLY)was there to capture the staff in all their glory! The Maintenance Engineering Sales Managers, President Curt Kesselring, and VP Dennis Leno all make snow angels on January 8, 2010, in chilly Fargo, ND. Temperature was -9°F (yes, 9 below zero) at the time! One brave soul does it only in his gym shorts! Yikes! You guys rock! Maintenance Engineering video. http://www.me-dtc.com
26 Jan 2010
271
Share Video

0:34
Maintenance Engineering's year end sales blow out in ends in a snow angel party and the local news channel 11 (KVLY)was there to capture the staff in all their glory! This is the 10 oclock news version. The Maintenance Engineering Sales Managers, President Curt Kesselring, and VP Dennis Leno all make snow angels on January 8, 2010, in chilly Fargo, ND. Temperature was -9°F (yes, 9 below zero) at the time! One brave soul does it only in his gym shorts! Yikes! You guys rock! Maintenance Engineering video. http://www.me-dtc.com
24 Feb 2010
441
Share Video

1:05
http://www.etrailer.com/tv-hitch-install-2009-pontiac-torrent.aspx Today on this 2009 Pontiac Torrent we are going to install part number 13591 from Curt. First I will go ahead and show you where the hitch mounts up onto the vehicle. It will mount up on the frame, on the outside edges, and also on the bumper to existing threaded fittings in the vehicle. With this vehicle since it has all the threaded fittings we can pretty much go ahead and start installing the hitch. Take a few minutes to inspect the threads to make sure that they are clean and you can run the bolts in and out really easy before you attempt to install the hitch. Since this is a new vehicle we are in pretty good shape. All right now that we have our bolts started go ahead and snug down the bolts. Okay now that we have all our bolts snugged down we can go ahead and torque them down as specified in the instructions.
27 Mar 2010
375
Share Video

1:27
http://www.etrailer.com/tv-hitch-install-2010-toyota-prius.aspx Today on this 2010 Toyota Prius, we are going to install part number 11469 from Curt. Okay looking up on our driver side of the vehicle, you see the tow hook right here. The hitch will actually replace where the tow hook is. On the passenger side of the vehicle we have got to take down this exhaust bracket right here and then the hitch will go in place and the exhaust bracket will go back on top of the hitch. Okay first we will start off by taking down the tie down bracket. Okay, we got that out of the way, now go on over to the passenger side and take down the exhaust bracket.
3 Apr 2010
322
Share Video

2:31
http://www.etrailer.com/tv-Hitch-install-2002-GMC-Sierra.aspx Today we are going to be installing Curt hitch part number 13322 on a 2002 GMC Sierra. The first thing you want to do is go ahead and lower the spare tire to get it out of your way. OK, we are looking at the drivers side of the vehicle here. At the bottom of the frame you can see we have got an existing bolt. We are going to be removing that off both sides of the vehicle, and we will be replacing that with new hardware. Just forward of that is an existing hole as well that we are going to be using a carriage bolt and block - just it down from the top of the frame, down into place. And then here on the bumper itself we have got two existing weld nuts. Those are going to provide the rear-most attaching points for the trailer hitch. And again, we are going to be using the hardware that is provided in the installation kit.
3 Apr 2010
184
Share Video

1:51
http://www.etrailer.com/tv-hitch-install-mitsubishi-montero.aspx Today we are going to install part number 13223 from Curt, and we are going to install this on a 2003 Mitsubishi Montero Sport. We will show you where the hitch mounts up on the frame. It reuses these existing holes where these bolts are right now. This tie-down hook actually gets taken off the vehicle and left off, and it is going to be the same thing on the passengers side, where this tie-down loop will get taken off as well. And these pieces will stay off the vehicle. Also, we did take down the spare tire, just to get a little easier working room, and the spare tire will go back up in its place when we are done. All right, when you take this down, there is a threaded fitting here which the hitch uses, too.
3 Apr 2010
190
Share Video

1:27
http://www.etrailer.com/tv-hitch-install-2008-toyota-corolla.aspx Today on this 2008 Toyota Corolla S we are going to install part number 11266 from Curt. This hitch is going to be relatively easy to install. There are four holes that are threaded in the frame. These two are on the passenger side of the vehicle. Over here on the driver's side it is going to be an identical set up. :20 The threads here are a little bit corroded even though it is a 2008, there is still some rust and dust in there so take some time to clean those out first. Spray some WD-40 in there run the bolt in and out to clean it out and then if necessary you may need to run a tap through if it is really corroded. The start was easier so what you want to do is run it in a little bit then back it off and run it in and back it off.
3 Apr 2010
273
Share Video

1:46
http://www.etrailer.com/tv-Hitch-install-2009-Pontiac-Vibe.aspx Today, on this 2009 Pontiac Vibe, we will be installing Curt hitch part number 12228. Okay, we are underneath the vehicle and we are looking at the drivers side frame rail. As you can see here at the end of the frame , we have got two existing weld nuts. Those are going to provide our two attaching points on the drivers side for our trailer hitch. We will be attaching the hitch to the weld nuts using the 12mm bolts and conical tooth washer. And on the passenger side, we will be using the same two weld nuts and same bolt washer combination. Over here on the passenger side, you will need to lift the hitch up over the exhaust. 0:31
3 Apr 2010
458
Share Video

2:00
http://www.etrailer.com/tv-hitch-install-2004-honda-crv.aspx Today we are going to install part number 13535 from Curt - this is a 2-inch receiver hitch - and we are going to install this on a 2004 Honda CR-V. First I will show you where the hitch mounts up on the vehicle. It is going to mount up on this frame member here, it is going to mount to the tow hook, and it is also going to mount on the other side of the frame member above the exhaust. To begin our install, what we have to do is lower the exhaust, and we are going to have to take down the rubber hangers here and here. And we will just gently lower it down. That should give us enough room for working room.
3 Apr 2010
399
Share Video

2:02
http://www.etrailer.com/tv-hitch-install-1990-ford-f150.aspx Today on this 1990 Ford F-150 we are going to install part number 14001 from Curt. One of our first steps this involves is we have to lower our spare tire a little bit to get it out of the way. Sometimes this hanger gets in the way. What you have to do is test it. We will go ahead and put the hitch up. Clamp it into position. Mark our holes, and drill out the holes in the frame. Clamping this up into position can be a little bit of a bear so it is a good idea to have an extra set of hands involved. And you see here we have got our hitch here clamped into position. What we will do next is block our holes where it is going to be drilled. We are going to be drilling here, here, and here. We will start off with the pilot hole about a 1/ 4 inch the way up to a 1/ 2 inch. We have got our holes drilled out on the passenger side here.
6 Apr 2010
199
Share Video

3:00
http://www.etrailer.com/tv-Hitch-Install-2009-Pontiac-Solstice.aspx Today on a 2009 Pontiac Solstice we are going to install part number 11119 from Curt. First we will go ahead and show you where the hitch will mount up onto the frame. As you can see there is an oval hole off to the left-hand side. The hardware is going to use that existing hole to attach the hitch to. However o n some models there is two existing holes, if the second additional hole is not already drilled in the frame you will need to drill it out yourself. As shown here this is the drivers side which is identical to the passenger side.
5 Apr 2010
337
Share Video

1:45
http://www.etrailer.com/tv-hitch-install-2006-chevy-silverado.aspx Today we are going to install part number 13322 from Curt, and we are going to install this on a 2006 Chevrolet Silverado. Looking at the passengers side, we are going to show you where the hitch mounts up. It is going to mount in this place right here, where the bolt is. Also, it will use this factory hole right here, and also it will use two holes in the bumper. We did a test fit on the hitch to make sure it clears the spare tire and if it does not, all you have got to do is lower the spare tire a little bit and move it out of the way. Next we will go ahead and just take off this rear bolt here - we will do one on each side - and then we can start installing the hitch.
29 Dec 2010
492
Share Video