Okay it’s time to wire our system. I’m just showing you the different, the colors of the wires here. I use red, white, and blue as my first three zones. It’s just easier to remember, red, white, and blue, one, two, three. Strip your wires down and give yourself plenty of working room there. I’ve got about 5 inches and then you’ll just use a pair of electrical pliers and strip your wires about a half inch on each wire.
Now the red, white, and blue will be my hot and I’m using my black wire as the common wire. So each valve has two wires coming out it. It does not matter which one you use for common, just grab one of them. The hot wire is not as important when it comes to valves versus say lighting or something.
So I have three values, I’m going to take three of the wires, or one wire from each valve equally three. And I’m going to hook all three of those up to my common. We’re using waterproof connectors. There are several different kinds of waterproof connectors, these are just filled with some sort of water sealant, and they’re regular electrical connectors with a water sealant inside of them. So we’re going to hook, those are commons, three commons hooked up to our black wire.
There are some that you can insert the entire end of the wire into a grease filled cap and close it. These are just a little faster. Now so I’m going to take my first zone, what ever I want to be zone one and I’m going to hook it up to my red wire. So then zone two will be white. Take the remaining wire that is left from that valve and then we’re going to do the same thing with zone three, the blue wire.
Now that we’ve got all of the wires hooked up, you want to pull a little bit of extra slack out of the your main line. The black wire there and so you can put it into the valve box so that later when you get ready to work on it again or change something or change the wiring, you’ll have room to pull it outside of the valve box, just wrap a little bit there. And then lay your wire, your black wire into your ditch, into your trench that you’ve already got dug. Run it over to where you want it to enter the house. And then we just use an electric or a hammer drill to drill through the wall where we need to drill through. And we take the wire through the wall. And then we’ve got out control box inside the garage in this particular instance.
So we pull our wire through and now we’re ready to wire up our control box. Once again, we just strip the ends of the wire. And pull the black rubber covering. Now we’re going to use the same red, white, and blue wires. So any excess wires that you have in this case the green and the yellow, we’re going to cut those off just to get those out of the way. It makes for less confusion. So we’re going to strip about half inch, you could strip maybe a quarter of an inch when you’re hooking up to the control box depending on what control box you use. And in each control box usually they’re very user friendly. One of them will say common or COM. And so you’re going to hook your common up to that area, which is our black wire. And then they’ll just generally be a one, two, and three for your different zones. So in our particular case we’ve got red, white, and blue for zone one, two, and three.
He’s having a little trouble with his common there. You don’t want to cut too much of the plastic covering off in this particular case because if you do your wires can touch inside of the manifold. So we’re just using about, about a quarter of an inch. Sometimes you’ll have to cut the wires at different lengths just to get it to fit in the valve box the way you want it.
Okay now we’ve got those connected one, two, and three and this particular controller is using an AC outlet so we’re going to hook our AC power up, which it’s pretty straig...
*******abed****/- Dormia natural latex mattresses are unsurpassed in the industry. Once you spend the night on a latex mattress, you'll wonder how you ever slept without one! Latex dynamically conforms to you, providing superior support and pressure relief. No more aching back caused by insufficient support, no more aches and pains caused by inadequate pressure relief. See why latex is the fastest growing segment of the mattress industry. By gently conforming to every contour of the body, our specially designed Tri-Zone latex core provides superior back support and outstanding pressure relief, reducing tossing and turning. Tri-Zone Latex is a material that has different size holes in different 'zones' of the bed to provide varying body support. Buy direct from the manufacturer and save up 60% off from our competitors. Visit www.abed**** or call 800-519-9038 fro details.
Refresh Network is a wander game plan association outfitting customers with facilitated end-to-end game plans and organizations to upgrade their business execution dynamically. Refresh Networks IT Auditing and Compliance Software understanding that associations face essential troubles and need strong responses for administer different errands in different strategies, refresh networks helps our customers in gaging their right necessities, and in addition in endorsing and realizing complete, healthy and trustworthy game plans.
Refresh Networks focus divisions, Consulting and Outsourcing work proactively to give an extent of courses of action and organizations to various associations. While invest huge energy in different zones, the divisions supplement each other, presenting a joined front that ensures regard added and enhanced organizations to our clients.
Refresh Networks Helpdesk is a forte player in the IT Infrastructure Distribution and Services industry offering some advantage Added Distribution in Information Security, Networking, IT Auditing, Infrastructure and Application Software and Services.
To Contact our Refresh Networks Team
Make a Call: (SA) – +27 (0) 10 035 1438