Results for: human body Search Results
Family Filter:
0:50
watch the power of the human body
15 May 2009
492
Share Video

1:01
Study: Casual Video Games Relieve Stress, Improve Mood First-of-Its-Kind Research Project Establishes Effects of Puzzle And Word Games on the Human Body and Mind
29 Apr 2008
231
Share Video

0:59
http://www.riverwired.com/ Scientists have found that some hard plastics contain endocrine disruptors, which apparently mimic hormones that regulate fat cell production in the human body. Perhaps it's time to stop handling all that plastic and pick up a cheeseburger...
6 May 2008
308
Share Video

2:30
1]User should take extra care while handling the toxic or infectious liquids to prevent coming in direct contact with these liquids. Usage of hand gloves, apron and proper face mask is recommended as a precaution against the accidental spillage over the body parts. 2]The operating button should be pushed/released back slowly and steadily at all the times. Taking extra care while working with liquids of high viscosity. Never let the operating button snap back to the Ready position while aspirating the liquid. 3] • Aspirate liquid into the pipette only when a proper tip is attached to its tip-cone. • Always clean the tip cone with a dry tissue paper before fixing the tip. • Ensure that the tip is tightly fitted to the tip cone. • Reject the tip if any liquid remains sticking on the inner wall of the tip even after the plunger is pushed to the second stage of pushbutton. • While pipetting , the pipettor should be vertically straight and tip should be dipped only a few millimeters into the liquid. • Pre-rinsing of tip 5 times with the liquid to be dispensed is recommended while doing the pipette calibration. This is important especially when dispensing the liquids which have a viscosity and density different from water. • Always control the push button movements with the thumb for consistency. • Allow liquids, Tips and pipettor to equilibrate with the ambient temperature. • Pre-rinse the tip several times before use when pipetting at temperature different from ambient. • Wipe the tip only if there is liquid on the outside of the tip, being careful to avoid touching the tip’s orifice. • Don’t keep pipette in your hand while not working to avoid transferring of body heat to pipette. • Select the correct pipetting technique(e.g, Reverse, forward etc.) depending on the nature of the liquid. 4] • Using excessive force to turn the push button outside the range specified for it may jam the mechanism and damage the pipettor. • Re-calibration is recommended every 6 months for a pipette used on daily basis. Re-calibration is also recommended in the following cases 1. When working with detergents or foaming liquids. 2. When working with high viscosity liquids. 3. In the event of dismantling of the pipette for servicing, greasing, O-ring replacement etc. • Use disposable tips only once to avoid cross-contamination. Avoid using inferior quality tips to ensure accurate dispensing of the liquids. • When not in use the pipettor should be rested upright on the pipette stand in the vertical position with the tip cone pointing downwards to prevent liquids entering the inside of the pipettor. • The micropipette user has to be fully aware of the hazards within the samples. Spillage, inhalation or contact with human body are dangerous. The liquid handling element of the procedure should present as few hazards as possible to the user.
28 Jan 2010
522
Share Video

2:23
1]User should take extra care while handling the toxic or infectious liquids to prevent coming in direct contact with these liquids. Usage of hand gloves, apron and proper face mask is recommended as a precaution against the accidental spillage over the body parts. 2]The operating button should be pushed/released back slowly and steadily at all the times. Taking extra care while working with liquids of high viscosity. Never let the operating button snap back to the Ready position while aspirating the liquid. 3] • Aspirate liquid into the pipette only when a proper tip is attached to its tip-cone. • Always clean the tip cone with a dry tissue paper before fixing the tip. • Ensure that the tip is tightly fitted to the tip cone. • Reject the tip if any liquid remains sticking on the inner wall of the tip even after the plunger is pushed to the second stage of pushbutton. • While pipetting , the pipettor should be vertically straight and tip should be dipped only a few millimeters into the liquid. • Pre-rinsing of tip 5 times with the liquid to be dispensed is recommended while doing the pipette calibration. This is important especially when dispensing the liquids which have a viscosity and density different from water. • Always control the push button movements with the thumb for consistency. • Allow liquids, Tips and pipettor to equilibrate with the ambient temperature. • Pre-rinse the tip several times before use when pipetting at temperature different from ambient. • Wipe the tip only if there is liquid on the outside of the tip, being careful to avoid touching the tip’s orifice. • Don’t keep pipette in your hand while not working to avoid transferring of body heat to pipette. • Select the correct pipetting technique(e.g, Reverse, forward etc.) depending on the nature of the liquid. 4] • Using excessive force to turn the push button outside the range specified for it may jam the mechanism and damage the pipettor. • Re-calibration is recommended every 6 months for a pipette used on daily basis. Re-calibration is also recommended in the following cases 1. When working with detergents or foaming liquids. 2. When working with high viscosity liquids. 3. In the event of dismantling of the pipette for servicing, greasing, O-ring replacement etc. • Use disposable tips only once to avoid cross-contamination. Avoid using inferior quality tips to ensure accurate dispensing of the liquids. • When not in use the pipettor should be rested upright on the pipette stand in the vertical position with the tip cone pointing downwards to prevent liquids entering the inside of the pipettor. • The micropipette user has to be fully aware of the hazards within the samples. Spillage, inhalation or contact with human body are dangerous. The liquid handling element of the procedure should present as few hazards as possible to the user.
29 Oct 2009
618
Share Video

3:49
Please cal Mildz +639208564932 or visit www.amegabracelet.blogspot.com How Biomagnetism Works? Bio-magnetism works in the human body through the circulatory system, the nervous system and the endocrine system. Magnetism is continuously penetrating every known particle, right down to the atom. Its ordering effect on living systems arises from the fact that magnetism is a blueprint of life itself. All known energies have as a base this electromagnetic field. The latest research indicates that magnetism has a very significant biological effect on human beings. Dr. H.L. Bansel points out that magnetism increases the electrical conductivity of the blood. Weak current runs through blood and the quantities of ions are increased. The newly ionized blood circulating throughout the body can significantly contribute to the efficiency of the blood flow as well as having a stabilizing effect on both high and low blood pressure. Blood contains ferrous hemoglobin (iron) that functions as a carrier of oxygen and carbon dioxide. As the blood circulates in the lungs, fully magnetized ferrous hemoglobin is able to transport more oxygen to cell tissue as well as taking more carbon dioxide waste from the cell back to the lungs for removal. Bio-magnetism works to regulate and normalize hormone secretion in the glands. It is currently believed that the increased electrical current being produced forms like a net around the glands and secretory ducts. An extra concentration of oxygen stimulates production while the electrical net regulates optimum secretion. As a result, conditions caused by a lack of hormone secretion or a hormone imbalance are affected through normalizing the hormone functions within the body. Hormones play a very important role in rejuvenation and in general energy levels while proper circulation ensures that the hormone level is evenly distributed to all parts of the body. When magnetic "flux" (the north/south flow of a magnet) passes through tissue, a secondary current is created around the flux lines in the tissue cells. This ionizes the protoplasm and rejuvenates the tissues by activating cell metabolism. The function of the cell becomes strengthened as the cell metabolism responds to the bio-electrical currents initiated by the magnetic flux. This current induces muscle spasms to decrease and the activated cell metabolism lowers inflammation in the tissue. The increase of cellular metabolism aids in the regeneration as well as in new cell growth. The negative pole energies of magnetism interfere with the nerve cell's ability to send pain impulses to the brain for the pain to be registered. Blood cells have potassium in their center which has a positive bio-electric charge. The nerve cell differs in an opposite way. During a pain response, the outside switches to potassium with a positive bioelectric charge. Through attraction, the negative pole charge of a magnet creates a "Blend" of the potassium's positive bioelectric charge as the natural flow of current is towards the negative pole. As the use of bio-magnetic in clinics around the world continues to increase, healers are seeing firsthand how natural magnetism promotes health and provides energy by eliminating disorder in the various biological systems. Stimulating blood circulation and building new cells to rejuvenate the tissues of the body does this. The bio-magnetic effect on iron and oxygen in the body allows the hemoglobin active movement, thereby activating circulations in a remarkable way. Ineffective and weakened blood cells are appropriately strengthened and refreshed, vital blood is pumped in the system. With the respiratory exchange improved and cellular metabolism activated increases vitality, prevention and cure of disease become a natural conclusion..
12 Jun 2008
553
Share Video

2:45
Human Body Weapon
10 Nov 2008
157326
Share Video

3:03
Texas Instruments Incorporated (TI) (NYSE: TXN) today announced a breakthrough generation of ultra-low power MSP430 microcontrollers (MCU), offering the industry's lowest power consumption for devices that can provide up to 25 MHz peak performance, increased Flash and RAM memory and integrated peripherals such as radio frequency (RF), USB, encryption and LCD interfaces. With as low as 160 µA/MHz (microamp per megahertz) active power consumption and 1.5 µA in standby, MSP430F5xx MCUs enable longer battery life and the ability to use smaller batteries for portable applications, or no batteries at all for energy harvesting systems that run off of solar power, vibration energy or human body temperature. For more information, please visit: www.ti.com/5xx. TI customer, Jim Vogeley, CEO, AdaptivEnergy, explains that their product, the Joule-Thief™ energy harvester, "collects and stores electrical energy from tiny mechanical vibrations and then uses this harvested energy to power a small, low-power MSP430 MCU. The MCU helps enable a compact RF sensor design to implement ambient intelligence that can detect and report critical conditions in factories, automobiles, offices, homes and other environments, all without wiring or batteries." Increased memory and integrated peripherals like RF, USB, encryption and LCD interfaces allow designers to add functionally needed to advance fields like personal medical, home automation, human interface control, automated meter reading (AMR), portable instrumentation, sensors, consumer electronics and security. Development tools, collateral, third-party support, training and university programs facilitate ease of use and shorten time to market. To view Multimedia News release go to, http://www.prnewswire.com/mnr/texasinstruments/32692/
11 Jun 2008
365
Share Video

4:10
When the events of "sickness" and "recovering" take place, our bodies become a battleground in of a bitter struggle. Microbes intrude into our body and reproduce rapidly. The body, however, has a mechanism that combats them. Known as the "immune system", this mechanism is the most disciplined, complex and successful army of the world. This system proves that the human body is the outcome of a unique design. In other words, the human body is an evidence of the flawless creation of God
28 Jun 2008
830
Share Video

3:10
When the events of "sickness" and "recovering" take place, our bodies become a battleground in of a bitter struggle. Microbes intrude into our body and reproduce rapidly. The body, however, has a mechanism that combats them. Known as the "immune system", this mechanism is the most disciplined, complex and successful army of the world. This system proves that the human body is the outcome of a unique design. In other words, the human body is an evidence of the flawless creation of God.
2 Aug 2008
1108
Share Video

4:52
Did you know that the architect of the Eiffel tower was inspired by the femur, the lightest and strongest bone of the human body? This is just an example of what we are going to tell you in this film. Everywhere, every living being, from plants to animals, on land and in sea, is equipped with amazing features. The purpose of this film is to show that the things people think they have attained with their own skill already exist in nature and to remind how wrong it is for man to be arrogant.
2 Jul 2008
682
Share Video

2:25
Did you know that the architect of the Eiffel tower was inspired by the femur, the lightest and strongest bone of the human body? This is just an example of what we are going to tell you in this film. Everywhere, every living being, from plants to animals, on land and in sea, is equipped with amazing features. The purpose of this film is to show that the things people think they have attained with their own skill already exist in nature and to remind how wrong it is for man to be arrogant.
2 Jul 2008
747
Share Video

4:16
Did you know that the architect of the Eiffel tower was inspired by the femur, the lightest and strongest bone of the human body? This is just an example of what we are going to tell you in this film. Everywhere, every living being, from plants to animals, on land and in sea, is equipped with amazing features. The purpose of this film is to show that the things people think they have attained with their own skill already exist in nature and to remind how wrong it is for man to be arrogant.
28 Jun 2008
762
Share Video

7:50
Did you know that the architect of the Eiffel tower was inspired by the femur, the lightest and strongest bone of the human body? This is just an example of what we are going to tell you in this film. Everywhere, every living being, from plants to animals, on land and in sea, is equipped with amazing features. The purpose of this film is to show that the things people think they have attained with their own skill already exist in nature and to remind how wrong it is for man to be arrogant.
28 Jun 2008
314
Share Video

6:40
EMF, EMR, Electropollution, Electromagnetic Radiation, Cell Phone Radiation, Mobile Phone Radiation, all have the same effect on the human body, this video wiil show the viewer how and why, most of all what you can do about electromagnetic radiation.
29 Jun 2008
548
Share Video

9:53
When the events of "sickness" and "recovering" take place, our bodies become a battleground in of a bitter struggle. Microbes intrude into our body and reproduce rapidly. The body, however, has a mechanism that combats them. Known as the "immune system", this mechanism is the most disciplined, complex and successful army of the world. This system proves that the human body is the outcome of a unique design. In other words, the human body is an evidence of the flawless creation of God.
28 Jul 2008
1658
Share Video