Results for: pulsejet
Here you can see the first Testrun of a Pulsejet engine.
A close up of the Lockwood/Hiller pulsejet.
this is my second pulsejet which is self sustained..iam just holding the injector using the air gun..and trying to adjust the injector for good thrust.this is a successful thrust you could see the cycle shaking due to the thrust produced by the engine..this will be clearly visible at 0:50..
design by: metiz (thanks for the help sir)
This is a firing of a pulse detonation engine at night. You can clearly see the exhaust flame and the chamber heating.
Heres a video of the thermalpulse 180-18 going through the throttle range. The advanced injector really does a good job. Its extremely extremely loud, and actually causes the ground to vibrate in quite a large area.
A Tutorial for lighting a homemade Valveless Pulse Jet engine
First run with a home built thermojet. There are leaks in the combution chamber which reduced the thrust.
How to make a jam jar pulse jet engine ( reynst )THAT WORKS. What Fuel? What jar? How big should the hole be? One hole or two? Safety.
15 Kg de empuje, duracion de valvulas 2 minutos, Frecuencia 188 Hz Esta es la primera vez utilizando movie maker
Strahltriebwerk, hier einer der ersten Versuche.
Triebwerkskopf aus Alu gedreht, Brennkammer und Auspuffrohr aus rostfreiem Stahl.
Treibstoff ist normales Benzin.
new Irvine Aeropulse Engine (I.A.E): the Talon. should push out a theoretical 30 pounds. Runs at about 85% full throttle becuase of the temperature when recording this vid (6 degrees C)
completely designed by James Irvine, build by me
To purchase SIMILAR engines, go to