Results for: spindle Search Results
Family Filter:
0:35
automatic coil winding machine is suitable for multi-connected and multi layer winding; wind 1-8 coils simultaneously at one time; automatic slot change, starting winding position, idling start, idling stop, double-ended stop, automatic reset and automatic start could be set in control system. There are two alternate spindles to facilitate higher output; apply to all kinds of micro motors such as a motor, pump motor, air conditioner motor, three phase machine, etc. Turns number, wire diameter can be set in the controller.
14 Mar 2017
45
Share Video

1:11
Each lacing machine is PLC controlled with an inverter drive and can be fully programmed to suit different stator slot configurations. Stator support tooling is very quick to changeover between different stator laminations and stack heights. A wide range of standard lacing needles are available. This lacing machine is suitable for lacing multi-species, less yield or more lead wire stator. This stator coil end lacing machine adopts vertical loading structure, Main spindle speed is adjustable.
14 Mar 2017
9
Share Video

1:32
1. Loading stator vertically; 2. equipped with pressing, automatic feeding, automatic cutting device, etc.; 3. overhang winding adopts twin needle lacing by servo system simultaneously; 4. needle transpositioning, hooking and stator indexing are controlled by servo system; 5. spindle adopts frequency speed control; slot by slot lacing, interval lacing and fancy lacing could be achieved by setting in human-machine interface;
14 Mar 2017
14
Share Video

0:48
CUSTOM SPINDLE WORK IN BUFFALO NY Custome Wood Working By Chi Chi 375 Grant St Buffalo NY 14213
17 Sep 2008
69
Share Video

1:03
CUSTOM SPINDLE WORK IN WNY Custome Wood Working By Chi Chi 375 Grant St Buffalo NY 14213
18 Sep 2008
128
Share Video

1:02
CUSTOM DUPLICATING SPINDLE WORK IN WNY Custome Wood Working By Chi Chi 375 Grant St Buffalo NY 14213
18 Sep 2008
94
Share Video

0:59
CUSTOM DUPLICATING SPINDLE WORK IN BUFFALO NY Custom Wood Working By Chi Chi 375 Grant St Buffalo NY 14213 (716) 885-9210
17 Sep 2008
48
Share Video

1:21
CD holder is a thing very common to a computer geek.But, making its efficient utilization is not known to many. Here are the two ways to hack a CD spindle and use it in a better way.
18 Oct 2008
24128
Share Video

4:32
Spindle playing "Carousel" live at Boundary Bay in Bellingham, WA. ©2007 Spindle
11 Jan 2009
229
Share Video

2:55
Gang Drill Machine by AutoDrill. The customer wanted to drill three holes at a time down the length of an extruded part. They built a linear control module to move the AutoDrill 2000 series unit and multiple spindle head so that with a single button push, the part would be drilled start to finish. They also built in programmable settings so the patterns could be changed. Contact AutoDrill at 908-542-0244 for more information or if you need a similar machine as shown, call the number in the video.
10 Sep 2009
1202
Share Video

0:45
AutoDrill multiple spindle head unit using Hougen cutter tooling to drill round hole in the side of a thick walled round tube. Positive plug ejection system in use.
17 Apr 2009
2144
Share Video

5:52
A basic and very simple slide-show type video showing multiple spindle heads for drill presses, tapping holes, CNC, punch operation second station set-ups, etc.
21 May 2009
1307
Share Video

1:31
Auto feed drilling Tapping SPM made by kasthuri machines for home appliance acompany. Kasthuri Marketing & Manufacturing Consultancy Pvt. Ltd., factory is located in Coimbatore, Tamilnadu, India. This highly precise auto-feed Vertical drilling machine with Hydraulic feed. Hard and ground pillars for stability. The drilling head of the machine tested for its best performance. It is perfectly suitable for mass production and second operation drilling single or multi holes after machining in CNC lathes and machining centers. this is set of machine in which single operator can operate drilling and also burnishing "T" slots in the table to clamp components in a better way. Increases production with consistency and almost 70% reducing the labor cost. The machine has the robust construction. Multiple spindle drilling / tapping heads can be fixed in this drilling machines. the machine should a quill feed or like radial drilling machine in which the external spindle for longitudinal movement and internal for rotary action. Multiple spindle heads will increase the production as many spindle you add in head and also depends upon components. It can double or triple your drilling / tapping / reaming operations by simultaneously drilling countersinking, reaming or tapping two or more holes in one operation. Multi-spindle heads have proved to be the most versatile method to drill / tap / ream in n numbers of holes. Multi drill heads (Multiple Spindle Drill Head) can be mounted on any standard drilling machines with suitable adapters and drive dogs. Main housing is made up of Aluminum casting which is precisely machined. All rotating parts are hardened and ground. Change over of PCD of the spindle can be set easily and accurately by jigs. Spindle run on needle and thrust bearings. IN multi spindle drilling heads drill revolution is usually identical with machine rpm.
12 Feb 2010
4533
Share Video

1:49
The Spindle Palm Tree will make you think you are in the tropics. Find Spindle Palm Trees at http://www.tytyga.com/product/Spindle+Palm+Tree
2 Oct 2009
296
Share Video

0:31
http://www.motorcityrepair.com/ZMoriSeiki.html Click Here to learn more about our Mori Seiki Spindle Repair service or call us at (888) 589-6004 for a free quote.
21 Jun 2010
227
Share Video

0:28
http://www.motorcityrepair.com/ZOKK.html Click Here to learn more about our OKK Spindle Repair service or call us at (888) 589-6004 for a free quote.
21 Jun 2010
259
Share Video