Official 1.1.2 & 1.1.3 BL 4.6 OTB Jailbreak & Unlock Pt. 1

Big Thanks to GeoHot for the Unlock and the DevTeam for the Jailbreak.

Please, if I've helped you unlock your iPhones, donate to me at PayPal @: AceMurdera@hotmail.com, it took me a lot of effort and a night of no sleep to crack down the easiest method in doing all of this. And I did also buy the 16GB iPhone risking it for testing so that's already $500 plus my 2 8GBs: $800, so I've clearly spent a lot of money, time and effort into this so any donations would be extremely appreciated.

***DO THIS AT YOUR OWN RISK***

***THIS METHOD ONLY WORKS WITH 1.1.2 AND 1.1.3 BOOTLOADER 4.6 OTB BOTH 8GB AND 16GB IPHONES, BOOTLOADER 3.9 SOLUTION DESCRIBED IN VIDEO***

***MUST HAVE iTunes 7.5 OR LATER AND MAKE SURE THAT YOU HAVE "JAVA" INSTALLED TO RUN WINDOWS.BAT!!***
______________________________
1. Q: Did you do this with a 1.1.2 or 1.1.3 OTB?
A: Yes I did it successfully with both versions OTB.
2. Q: I upgrade to 1.1.3 through iTunes, what should I do?
A: Once you've jailbroken your 1.1.1, add "i.unlock.no" to your sources, go to Unlocking Tools folder and install "Baseband Downgrader" then install OktoPrep and upgrade to 1.1.2 and so on.
3. Q: When I upgrade to 1.1.2, I get error 1015, what do I do?
A: Just unhook and hook your iPhone back in, then run apptapp and wait while it keeps rests until ur in.
4. Q: My iPhone is still bricked, I'm still not getting a signal, what do I do?
A: Add "sendowski.de/iphone" to sources and install Bricktool / SignalFix in sendowski.de Unlock folder.
5. Q: Does it work for a iPhone that has already been activated with AT&T?
A: Yes, you don't have to unlock it though, Ill post a video up shortly... this portion will be updated..
6. Q: What is Hacktivation, and why does my phone go to emergency screen once restarted at 1.1.3?
A: This is the consequence of not listening to Ace, and doing what's recommended. If you pressed no, you may possibly have to activate through AT&T. So you're gonna have to do EVERYTHING over. So choose ALWAYS YES to Hacktivation!
7. Q: I Successfully upgraded to 1.1.3 but I can't sync properly with iTunes, what do I do?
A: From the iClarified folder install "SyncFix"
______________________________
***IMPORTANT***
If you have an already Jailbroken 1.1.2 or 1.1.3 with BL4.6, all you have to do to unlock your iPhone is add the iClarified source (installer.iclarified.com) and just install GeoHot's unlock from there and you're good to go! Also, you can only follow these instructions if you are on a 4.6 BL iPhone. This means that your iPhone came with 1.1.2 or 1.1.3 Out of the Box. PLEASE MAKE SURE YOU DON'T DO THIS ON A 3.9 BL IPHONE!
______________________________
***** ERROR 1015 AFTER UPGRADING TO 1.1.2 SOLUTION: AFTER YOU GET THE ERROR, RUN THE SUPPLIED APPTAPP INSTALLER AND BOOT IT UP AGAIN WITH THE FIRMWARE 1.0.2, AFTER THAT LET IT RESTART AS MUCH AS IT NEEDS TO AND YOU SHOULD BE IN! =D
______________________________
Links:
*****iPhone Firmwares:
(Needed for Error 1015 after downgrade to 1.1.1; Make sure you choose FW 1.0.2 when you run it):
1.1.2:
(For Mac Users... Click on Activate Phone):
or iTouch 1.1.1 Firmware: or iTouch 1.1.2 Firmware: to add iPhone/iTouch Sources:
Run Installer, Sources, Edit, then Add.

*****CHECK TO SEE WHICH ONES HAVE ALREADY BEEN INSTALLED*****
Apps on iTouch: Luck!

-Ace