International
This is the Pitch Curve and Trimming flights of my Blade 400. I call it my Electronic and Mechanical "break in" period.
It allows me to test and trim my equipment before really getting aggressive. It also allows me to find out the characteristics of this heli's flight. It is all part of the learning curve when flying a new helicopter. So now that I have it trimmed, I will present a more aggressive flight when my fingers don't get so cold next time. Stay tuned and thanks for watching.
Thanks for the encouraging video, I just picked mine up yesterday. Now if it will just quit raining.
By jimstur 1234738365 Reply Spam [+0] Moderate Up Moderate Down RemoveHow to hover soo well? mine always slip to the left....
By Helenair 1206813893 Reply Spam [+0] Moderate Up Moderate Down RemoveGot my new blade 400 too, never flight anything before (accept flight simulator), first time fly really get my hand cold. flown few feet of the ground only... dont dare to fly high... Can u actually trim till it easily hover without input?
Good luck with yours. Unfortunately, they never ever will fly hands off.
By Night Flyer 1209787716 Reply Spam [+0] Moderate Up Moderate Down RemoveWell it takes practice, but you have to control it not let it control you. Helis never can be trimmed to hover hands off. It is a busy time all the time. Study my 9 heli tips for more.
By Night Flyer 1206842162 Reply Spam [+0] Moderate Up Moderate Down RemoveMany Thanks for the tips!
Best Regards.
Rated 4.68 | 53,470 Views
Rated 4.35 | 92,243 Views
By 224272
Rated 2.95 | 1,399 Views
By Night Flyer
Blade 400 Spektrum Dx6i Pitch and Throttle...Curve Settings.
Rated 4.21 | 161 Views
Affiliate Submitter: NightFlyyer
Blade 400 Helicommand 3D RC Helicopter Inv...erted Crash N3M1S1S
Rated 3.63 | 422 Views
Affiliate Submitter: 0n3m1s1s0
Blade 400 RC Helicopter Flying Session 1 o...f 5 Sept 08 N3m1s1s
Rated 3.86 | 319 Views
Affiliate Submitter: 0n3m1s1s0
Blade 400 3D Remote Control Micro Helicopt...er RTF EFLH1400
Rated 3.29 | 520 Views
Affiliate Submitter: chrisbofh
Blade 400 RC Helicopter. So You Think Your...Ready for 3d?
Rated 3.37 | 13,681 Views
By Night Flyer
Blade 400 3D Gyro/tail Servo Setup Part 2
Rated 3.60 | 829 Views
Affiliate Submitter: sokal11
Blade 400 3d Head Setup Part 2
Rated 4.20 | 629 Views
Affiliate Submitter: sokal11
BLADE 400 3D TAILSETUP PART 2c
Rated 0.00 | 209 Views
Affiliate Submitter: sokal11
Blade 400 3D Tailsetup Part 2B
Rated 2.70 | 149 Views
Affiliate Submitter: sokal11
Blade 400 3D Tail Setup Part 2A
Rated 2.70 | 184 Views
Affiliate Submitter: sokal11
Blade 400 3D Gyro/tail Servo Setup Part 1
Rated 4.50 | 1,047 Views
Affiliate Submitter: sokal11
Rated 0.00 | 1,074 Views
Affiliate Submitter: hobbyconcepts
T-Rex 450 Blade 400 All Out War Must See V...ideo [13+]
Rated 4.52 | 1,573 Views
By Windy1000