Cheapest Biodiesel Ever !!! From Animal Fat !!!

The raw ester is returns to the solid form in the 0'C temperature, but if you add some anti gel temperature of the coagulation is about -5'C to - 7'C. Add 3% of petrol then -10'C ;O)

What is this anti gel and does it have a trade name? Also is it anti gel + petrol that brings the gel point down to -10'C or petrol on it's own?

In my country trade name is Skydd - thats Scandinavian product. It's fuel additive that brings thickening down. It would be .... a petrol f.e. ;o) Any organic solvent.

I see now,can I use sodium hydroxide instead of potassium hydroxide?

Sodium hydroxide - yes, but no the one to cleaning pipes. Frothing substances made it useless...
Everything will bubble up, friend :o)

now I know why the label only says "contains sodium hydroxide",I wonder where to get potassium or sodium hydroxide.I'm from the Philippines,where you from?

Poland

is it true that this will gel in 32 degrees?

I have written it earlier

a tropical country,18'C is considered cold.you said it will gel on 0'C.We do not experience that kind of weather,they say it will gel on 32'C and that's too bad for in summer months
it can reach to 35-38'C.

Please operate 'C :o)

does it need washing?is it as effective as the one made from SVO or WVO?

Washing sometimes make worse the situation. The soap is falling by itself after a few hours. Important is content of the lye.
PH should be around 6. The fuel is more calorific from the lard than from SVO or WVO...

washing will get the methanol and catalyst out of the fuel.Sir ,I have read that adding 5% of what they call white spirits will have the same effect,I think they call it paint thinner here.

My method is:
I am checking contents of the lye. I am leading the ester to the 70'C temperature - I am evaporating the methanol, I am evaporating water next in 100'C. I wash only at high contents of the lye with 2% sulphuric acid. That is my solution - i could be wrong...

the solution is use for thinning oil base paints

Is this true? instead of methanol and lye just add 5% of paint thinner will create your biodiesel?

Methanol lye lard = biodiesel. Add the organic solvent so that doesn't clot in 0'C but in -5'C ~ -7'C... You have to try by yourself...

recovering methanol from glycerine?

is a 'SVO' and 'WVO' ?

straight vegetable oil and waste vegetable oil

You can make a nitrglycerine or dynamite :D:D:D

use it as a fertilizer, or burn it in a specjal device (another movie from my channel)

not recomend hydroxide of sodium. Try to find hydroxide of potassium. If you still want to use sodium try to add 30g/kg to 40g/kg and watch which one sample is more clear.
AND its grams per KILOGRAMS not LITRES. One kilogram of fat it's ~ 1,25 ltr... ;o)

Thanks for the above information. One other thing, do you stir it once you have added the potassium hydroxide or sodium hydroxide as you don't show this in the video?

You should stir it very hard