English
I have a trick that has been around for a long time. This is a trick we used to use for exhaust manifolds when the bolts were so rusted in that breaking a bolt was very likely to happen. To avoid having to remove the stud in a separate process we used this trick to get them loose. This works better with a fair amount of heat to start and then let the wax slowly cool for about 3-4 minutes before attempting to remove the bolt of nut.
I'll try it thanks
By smokum 1222400046 Reply Spam [+1] Moderate Up Moderate Down Removespraying WD40 onto seized threads should be just as good.
By molewrench 1226939368 Reply Spam [+0] Moderate Up Moderate Down RemoveRated 4.33 | 106,039 Views
By nam meo
Rated 4.51 | 659,430 Views
By SMARTVID
Rated 4.16 | 1,236,198 Views
By Kipkay
Rated 3.91 | 3,942 Views
By 1599688
Rated 4.44 | 308,210 Views
By thekid
Rated 3.88 | 5,122 Views
Great Pepsi Commercial - Funny!
Rated 4.17 | 371,227 Views
By lewie3rd
Rated 4.07 | 10,341 Views
Rated 3.51 | 8,464 Views
How To Levitate Any Object! SECRET REVEALED!
Rated 3.95 | 149,040 Views
By surfshack911
Rated 3.99 | 10,737 Views
By NeoTheC4
Rated 4.57 | 796,875 Views
By Kipkay
Raul's Fantastic Goal Against Barcelona
Rated 3.88 | 10,877 Views
By F.R.S
Rated 4.50 | 234,118 Views
By alibhaie
Rated 4.66 | 1,215,811 Views
By Ega