Wireless Power Transfer


Uploaded on April 03, 2012 by Efxkits

Model no:174 The main objective of this project is to develop a system of wireless power transfer for medical applications. Many people use pace makers (An electronic device that works in place of a defective heart valve) implanted in their body that runs on a battery. The patient is required to be operated every year to replace the battery. This project is designed to charge a rechargeable battery wirelessly for the purpose.

This project is formed out of an AC 230V 50Hz to AC 20 KHz at 12V circuit. The output is fed to a tuned 20 KHz coil forming as primary of an air core transformer. The secondary coil develops a voltage of 20 KHz at 12volt while it is kept over the primary coil where air is used as the core. The output of the secondary is given to a high frequency bridge rectifier that delivers DC which is then regulated to maintain a constant charging current to a NiCd (Nickel Cadmium) rechargeable battery.

Normally these batteries have a long life of 7 years. Thus the patient’s operation time can be deferred to each 7 year after for replacement of the battery as the charging can be done for 7 years externally. But in the project a DC fan motor is provided in place of a battery charging arrangement for better visibility.

DIY Kits, Do It Yourself Concept, Efxkits, Edgefx Technologies, Final Year Projects, Engineering Mini Projects, Electronics Projects For Engineering Students, Final Year Projects For Students, Embedded Systems Projects, Projects In Embedded Systems, Science & Tech
Comments on Wireless Power Transfer