Cooljag - LED DIY Cooling Fan

They're about $12 from NowDirect.

They come in 120, 90, and 80mm sizes.

how much is this, and this is 80mm right?

vn, u've been a great help, i've just installed it w/room to spare, just as i though, vn and hope u have fun w/the fan too

That's right, there is a USB jack on one side for the computer interface, and a four-pin connector for the fan itself. There's no notch: the human eye will see the message in whole (without the blank notch), but the camera catches that blank spot.

ahh, does the usb jack disconnect on each side, both fan and mobo, and also i notice a notch where u cant see the letters or the blue circles, is that the camera playing tricks on our eyes or is there really a dead spot like that

Actually the program just sets the message(s) in the memory of the fan itself (all hardware/firmware), so there's no active program running after you program the fan. The cable should be disconnected from the fan before you run it normally. The fan will run as it should - showing both the messages and the temp.

ty ty, i think my antec has about 2mm maybe 2.5 to spare before id be rubbing curcuit board and mesh = break, ty again ordered it right now actually, im just gonna have it say silly S**t , you know "Poop...Balls...Weiner...Pwned...F**k U...and on and on, does it get along with any other programs is what i wonder, set it to show ping or temps or something relevant

Depends on the app... if you have a see-thru case, this works great (LAN parties, trade events etc or just for fun), or like you said, just mod the case and use a mesh or some acrylic cut grill. The circuit board LED blade sticks out just a little, but its something like a 1mm (0.1 cm?)

It plugs into your mobo via a USB port (if you have a front end port for your PC, you can plug it in there, or in the back of the motherboard where there are usually 2 to 4 USB ports).

plus...i have an antec 900, as im sure many people interested in such a fan would also have, does the circuit board led blade spinny thing lie flush with the mount or does it stick out, either way im getting it, i'll just have to cut out the mesh and mod my case a bit if it protrudes

if u dont mind my asking, just exactly what does it plug into, all i can find is it says usb, is that to mobo or something silly like running wires out the back, cool vid though ive been waiting for this since polotech announced the idea months ago, finally here woot mothafu**ah woot!!!