International
HHO Dual anode Plasma spark plug prototype. It was a Champion CJ8 plug out of a 16hp electric start lawn mower engine. We busted out the inside to make way for the new anode test tubes. The electrical tape and rubber hose will not hold up in the cylinder but it will work fine for a few bench tests (which we'll post after we get some videos). Thank you 'gotoluc' and all the other youtubers that have been working on the new spark plug designs. Click the link below for more videos here or check ...
Rated 4.37 | 821 Views
Affiliate Submitter: capacitor70
Rated 4.42 | 123 Views
Affiliate Submitter: andrewg85
Rated 4.14 | 316 Views
Affiliate Submitter: Jetijs
Rated 4.50 | 97 Views
Affiliate Submitter: ozicell
Water for Fuel Plasma Spark and Inline Ele...ctrolysis Setup
Rated 4.42 | 874 Views
By WaterforFuel
Rated 4.23 | 213 Views
Affiliate Submitter: m3sca1
Water for Fuel Plasma Spark Test Part 1
Rated 2.91 | 280 Views
By WaterforFuel
Water for Fuel Plasma Spark Test Part 2
Rated 3.03 | 765 Views
By WaterforFuel
Water for Fuel Plasma Spark Test Part 3
Rated 3.52 | 280 Views
By WaterforFuel
Water for Fuel Plasma Spark Test at Night
Rated 3.07 | 609 Views
By WaterforFuel
Water for Fuel Plasma Spark with On-Demand...Water Fuel
Rated 4.33 | 238 Views
By WaterforFuel
Water for Fuel Plasma Spark with Inline El...ectrolysis
Rated 3.23 | 3,640 Views
By WaterforFuel
Plasma Booster W/ Oscilator Inverter on SUV-1
Rated 4.36 | 137 Views
Affiliate Submitter: revizal
Water for Fuel 3 Phase Plasma Spark
Rated 3.75 | 268 Views
By WaterforFuel
Plasma Effect on Gasoline Vapour
Rated 4.50 | 482 Views
Affiliate Submitter: revizal
The Jumping Marble (Water & Plasma)
Rated 4.50 | 152 Views
Affiliate Submitter: retrod1