CHEAP WIND TURBINE FROM CEILING FAN Video007

HERE IS HOW TO BUILD IT: http://sites.google.com/site/greenwindandotherhomeenergies/cheap-wind-turbine-from-a-ceiling-fan THIS WIND TURBINE WAS MADE FROM A SCRAPPED CEILING FAN FROM THE NEIGHBORS TRASH DAY. THE PROP WAS CARVE FROM A WHITE PINE 2 X 4 FROM THE SAME PILE. THE ONLY COST WAS PLUMBING PIPES AND FITTINGS AND NEODYMIUM IRON BORON MAGNETS. AND A FEW TACK WELDS. ALL UNDER 40 U S DOLLARS. MY SHOP BATTERIES STAY CHARGED FOR MY CB RADIO AND 12 VDC FLOURESENT LIGHT. I USE THEN A COUPLE OF HOURS A DAY. ABOUT 50 SECONDS INTO THE VIDEO A GUST OF WIND COMES UP AND YOU GET TO SEE THE AUTOMATIS FURLING MECHANISM WORK. THE BLADES AND THE TAIL GET PARRALEL WITH EACH OTHER AS IT KIND OF FOLDS UP. THE LENGTH AND WEIGHY OF THE TAIL GOVERN THE WIND SPEED IN WHICH THE BLADES ARE TO FULLY FURL. OPEN VOLTAGE IS AROUND 45 VDC AT MID TO FULL FURL. THIS MACHINE NEEDS TO GO HIGHER AND A LITTLE MORE WEIGHT ON THE TAIL.
IT STARTS UP IN ABOUT 7 MILES PER HOUR AND STARTS CHARGING 12 V AT ABOUT 11 OR 12 AND IT WILL STAY RUNNING AFTER START TO ABOUT 5 MPH.
THANKS FOR WATCHING. MORE TO COME, MUDDYMUDDYMUDDMANN
PLEASE MAKE COMMENT GOOD OR BAD I LIKE EM ALL
KNOWLEDGE WITHOUT INSIGHT OR OPINION LACKS THE WISDOM TO FURTHER ITSELF.
CHECK OUT GOOGLE SITES: GREENWINDANDOTHERHOMEENERGIES....TO CHECK OUT HOW IT IS COSTRUCTED. SITE STILL UNDER CONSTRUCTION. KB5ETP@YAHOO.COM
MUDD