(video 13) 15 Cup Fuel Cell "Flip Cup" Demonstration (HHO, Brown's Gas, Hydrogen, Hydroxy)

Smaller containers NICE... I like small instead of huge

I took your advice and reconfigured my cell as follows: + NN NN NN NN NN -

It does not produce as much as before, but it isn't bad. The best part is that the connectors and the container never got warm during the past 4 hours I've had it running.

I did have to add more KOH to get similar output. Instead of 1/4 teaspoon, I'm using a 1/2 teaspoon.

I'll be sure to record the output and give credit where it is due. You helped me out big time!

Smack is the Man! I've been watching his videos for almost a year now.

I built several other fuel cells before using the cups, but all I was doing was copying someone else's work, so I really didn't learn anything. I still have my Water4Gas (garbage), sirHOAX Lowes Clamshell, a Smack Cell knockoff, and I even tried to put together a replica of the EBN Dry Cell.

But only having bits and pieces of the puzzle makes it difficult to know why or how to get results.

Thank you for all of you help.

and then it looks like you are producing more HHO gas but in fact it is the same amount of HHO gas. It only looks like more HHO gas when the water is warm. My teacher always said that you only know for sure when you do measurements. Keep up the good work though, you are learning fast :-)

That is something that is worth to try.
The smack booster makes use of that configuration. (check this channel from Eletrikride). But you know for sure that it is more productive when you can measure the HHO output. When you can measure the output you can calculate the efficiency called MMW, (milliliters per minute per used watt). The water temperature is also important because you get different outcomes with different water temperatures. The gas expands drastically when it gets warmer....

and then it looks like you are producing more HHO gas but in fact it is the same amount of HHO gas. It only looks like more HHO gas when the water is warm. My teacher always said that you only know for sure when you do measurements. Keep up the good work though, you are learning fast :-)

That is something that is worth to try.
The smack booster makes use of that configuration. (check this channel from Eletrikride). But you know for sure that it is more productive when you can measure the HHO output. When you can measure the output you can calculate the efficiency called MMW, (milliliters per minute per used watt). The water temperature is also important because you get different outcomes with different water temperatures. The gas expands drastically when it gets warmer....

what if I have 10 neutrals, but only have spacers inbetween every 2 neutrals? This way I would be keeping the cups to 2 volts each, but would have more reactive surface area.

I figured this was the case, because my neutral cups are touching each other they become one neutral cup. That would mean that my 15 cup cell is actually a 3 cup cell and the positive negative and neutral are all using 4 volts.

I'll try reducing the number of neutrals and inserting spacers.

A different enclosure is not the way to go, you can get rid of the heat by making a cell that is build the wright way. A hydrogen cell that is working properly should not get much warmer as 110 degrees Fahrenheit. That is when you use 5 separated, isolated neutrals with one positive and one negative. Stacked neutrals will react as one single neutral, do your measurements.