Honey Bee King 2, Hh Gyro

can u teach me how to do that..? i should initialize while the switch is up or down?

HH mode is the down position on the gyro switch

how to flip to hh mode?

it goes to the top, happy flying :)

THANX, I USED WINDOWS MOVIE MAKER, ITS REALLY EASY TO WORK WITH, JUST PUT THE 3100kV OUTRUNNER ON MY BEE, WILL UPLOAD VIDEO SOON :)

Great recording lighting and speed effects! How did you do that?

And yes, you are right: For relaxing it is good to go back to the PiccoZ from time to time. ;-)

THANKS for this - very helpful :)
Does the single orange cable (rec no. 5) go to + or - (top or bottom)in the receiver?

esky hh gyro should be on its side. can't say the same about others. Once in hh mode the tail servo will creep left or right, try to get it to stop in center position using the trim it works great for me. or bring it to a controlled hover in rate mode and flip it down to hh, good luck

Why did you installed the gyro on its side? I cold not get mine to work:
Main connector in Ch 4
Gray cable to negative.
2nd connector to CH 5, orange cable to Negative.
Wont stop moving back and fwd. with trimer a little better but thats it, not able to fly.
need advice thanks, Marcos

your attitude S**ks !