Homemade Stun Gun

can anyone tell or give me the exact link of this stun gun (the tutorial on how to make it)?

.,/

CRAP DNT BOTHER

use some words mad i cant understand what stuff to use if u just show me my holding it

or instead of cord use 9 volt battery for a way weaker spark

instead use copper wire put 1 end inside of a pluged in ps2 or xbox power cord and tie the other stripped end to keys or a little metal rod use to wires one on each slot on the power cord then touch the metal together and makes a huge spark or if u touch the metal it shocks u like hell(found out on accident)

ooooh stungun not shotgun

cool

Instead of running the electricity through the flashlamp , he ran it through you...

xD i don't freakin know :P

pulled out the wires for the flashlamp, DUH

lol when i opened it i couldn't let go for like 2 seconds... i even discharged some of the energy before i touched it...

Thats not really a "homemade stungun"

Wheres the stun gun?? All i see is a charged electrolytic capacitor. A good demonstration of how the stun gun works though

Even if it shocks you, the capacitor used in disposable cameras is weaker, so it won't do any actual harm, it just hurts.

one in my class took a single-use camera with flash and did something..i don't really know but he had taken out two cables and then he stabbed me with those cables and took a photo at the same time and the electricity came- hurts alot!! =/

ok i would volunteer but i porbaly dont live were you liveXD

rubber goves my N****r so ghetto lol these clowns are wack son

hey take the capacitor out of broken one and put it with a new one for more force

what I did is took the camera and put it in a wood box and soldered the wiers to 2 nails that stuck out of the box and it works like a charm until my friend snaped the circut board in half.

I brought a disposable camera to school to shock friends. ended up shocking myself 5 times

i'm making a better one than my first one. one time when i was young i opened a flash camera and i got a shock that made me throw the camera so hard it broke into pieces.

I will have to try that. I used the gloves when I first started playing with it because i was really paranoid about it shocking me. I later realized that as long as I didnt touch the wires I would be fine.

if you have good soldering skills you can use it without gloves and put it in the camera itself with just 2 wires sticking out, good vid

I got a cheap camera, I got a short loss of control (3 seconds) but it was more like a really strong vibration rather than pain.

I had a friend let me test it on him, it shocked him pretty good. Left some nice welts and burn marks too.
Depending on the size of the capacitor you are using, you could really hurt someone with these.

I've been making these for years. We used them in our potato guns with a relay as a sparker. They aren't that bad when you get shocked by them, even though they are loud as hell.