International
Lock picking by one bump key Mul-T-Lock 3in1 and Classic
I don't really know if this lock picking videos are good,, I become expert about unlocking the locks and master locks in 2 days after watching this videos!! Me my self just doin for hobby but imagine, there are lots of bad guys out there and they will have lots of bad ideas after watching this videos...
By Deper38 [Affiliate User] 1196974992 Reply Spam [+0] Moderate Up Moderate Down Removea multi lock dos not work that way it uses conventional tumbler on the side and valleys fo horizontal pins hence the name multilock
By babot6 [Affiliate User] 1196581843 Reply Spam [+0] Moderate Up Moderate Down Removedo they sell these ???
By p0rtaL [Affiliate User] 1195981286 Reply Spam [+0] Moderate Up Moderate Down Removelooks like a fake to me, notice how with the bump key, he always shows you face A, and then rotates it 180 before he puts it in the lock, then after he takes it out, rotates it once more to show you face A again, you never see face B in close-up
like I said, looks fake to me
please name this song .. and nice video great
By rafaellidiane [Affiliate User] 1193394140 Reply Spam [+0] Moderate Up Moderate Down Removenice video
By HOWTOpick [Affiliate User] 1192640120 Reply Spam [+0] Moderate Up Moderate Down Removejust do it with a bobby pin!!
all about the clasics
You cut the key into DDDDD55555. If there is only one A1/A2 or B1 it is no longer possible, and sidepins as well. I have made over thousands and thousands MTL cylinders, so I can know. The other thing is you do it in the most perfect position. I want to see you doing it in a door with safetyshields. If I see right, this is the 015 profile. The IA profiles are must more diffecult.
By knekelwijn [Affiliate User] 1188479253 Reply Spam [+0] Moderate Up Moderate Down RemoveWhy trance???? uhhhgh
By awake303 [Affiliate User] 1188245300 Reply Spam [+0] Moderate Up Moderate Down Removeummmmmmmmmmmmmmmmmmmmm...
By bikerkid26 [Affiliate User] 1185488114 Reply Spam [+0] Moderate Up Moderate Down RemoveCorrection veedubtd12
mul-t-locks are bumpable.
I have seen it in person with my own eyes.
your right about the keyblank being about to accomodate two diffrent locks. But just so we all know.. mut-t-locks are bumpable. {not to be confused with multi-lok}
Spam Spam Spammer dont waist my time
By TenFourOver [Affiliate User] 1185365169 Reply Spam [+0] Moderate Up Moderate Down RemoveRussian Club of fans{amateurs} of locks has inserted MTL in January 2007.
The cylinder full dung.
Thanks City that has checked up and has confirmed.
Make Up to $3,500 and More Weekly with Google & Clickbank Using a Simple
System Which I Will Perform for You
For Only $7
"Read On To Discover How This Site Can Flood YOUR Bank Account With Endless Automatic Cash In Days...Even If You Have NO Website, Product Or List Now!"
This Complete Money-Making System Will Take You From A Complete Beginner To Making Huge Cash Online From Scratch!
visit us at [_Unleashyourfortune.com_]
lol
By uknowigotskill [Affiliate User] 1184318528 Reply Spam [+0] Moderate Up Moderate Down Removeu leave it open u mupit u can c it open abit
By CORNER2k6 [Affiliate User] 1184163940 Reply Spam [+0] Moderate Up Moderate Down Removethe dipshit should have tapped in time with the music
By typo368 [Affiliate User] 1183863062 Reply Spam [+0] Moderate Up Moderate Down RemoveThis poster would like you to believe that Mul-T-Locks are bumpable by demonstrating that his "bump key" opens the lock. Compare the rotation of the cylinder when it's being "bumped" to when an incorrect key is inserted. There is too much play when the poster is "bumping," leading me to believe that the side of the key that we're not seeing, is actually the correct profile for that particular lock. Sorry dude, Mul-T-Lock isn't bumpable, and you didn't prove anything.
By VeeDubTDI2 [Affiliate User] 1182307283 Reply Spam [+0] Moderate Up Moderate Down RemoveVery sneaky. Too bad key #1 isn't a actually a bump key. Mul-T-Lock cylinders have one set of tumblers. Therefore, each key can actually be cut for two locks. One profile on each side of the key. Notice that key #1 is cut for full depth on one side, but that's not the side that is up when inserted into the cylinder. What the poster of this video ISN'T showing us is the other side of the key that gets inserted facing up. This profile is actually the correct profile for that lock.
By VeeDubTDI2 [Affiliate User] 1182307139 Reply Spam [+0] Moderate Up Moderate Down Removehi i am a boy named teddy i am 7 years old and i have scary eyes and no ears or nose if u do not send this to 15 people i will arrive in ur room tonight and i will bring my knife n stab u to death this is not a joke if u send this to 15 videos before u go to bed something good will happen either u will get asked out on the computer or someone will say that they luv u or they will call u at 10:22 u can not send this to me
By fattnic [Affiliate User] 1181154825 Reply Spam [+0] Moderate Up Moderate Down RemovePLEASE DON'T READ THIS you will die in seven days if you don't post this comment on 10 videos in the next hour. if you do, tommorrow will be the best day of your life
By goodkid1000 [Affiliate User] 1181123839 Reply Spam [+0] Moderate Up Moderate Down RemoveIts not cool to see this vids.
What about my front door?
Lol, just kidding, im a picker myself and its one of the coolest and funnest hobbies i know.
R u the sort of guy that always thinks he is being followed, always 6 locks on a door, always think there is a theory, a conspericy, the "mister-kno-it-all". I BET YOU ARE!!!
By thames21 [Affiliate User] 1179019342 Reply Spam [+0] Moderate Up Moderate Down RemoveWhere can you but that lock with the bump keys? thnx!
By Vsca [Affiliate User] 1176689304 Reply Spam [+0] Moderate Up Moderate Down Removeyou have a be-living problem oscarfeliciano... i bump a key in 1 minute flat, all i need is a look at the type of lock, my dremel (miniturning grindingwheel) and one key from "my private stash" and i can pick 9 out of 10 locks" i can do it in 45 seconds if the brand of the lock is in the outside.
By nestorrfortuna [Affiliate User] 1174868298 Reply Spam [+0] Moderate Up Moderate Down RemoveRated 4.50 | 3,856 Views
Affiliate Submitter: bumpfiend
Rated 3.60 | 647 Views
Affiliate Submitter: mcguinty999
Rated 3.75 | 13,932 Views
By Atrix999
Raking a Mul-T-Lock Garrison Dimple (2) UK...Bump Keys
Rated 4.50 | 417 Views
Affiliate Submitter: bumpfiend
Raking a Mul-T-Lock Garrison Dimple UK Bum...p Keys
Rated 3.90 | 1,011 Views
Affiliate Submitter: bumpfiend
Rated 4.30 | 2,238 Views
Affiliate Submitter: wzlom
McGuinty's Mul-T-Lock Challenge Video
Rated 4.50 | 997 Views
Affiliate Submitter: Keymuncher359
Bumping Mul-T-Lock UK Bump Keys Lock Picking
Rated 4.50 | 2,819 Views
Affiliate Submitter: bumpfiend
Mul-T-Lock 5 Pin in Pin Bumped
Rated 4.50 | 99 Views
Affiliate Submitter: Keymuncher359
Mul T Lock 6 Pins Thanx 4 the Lock ' ANDY0...902 '
Rated 4.50 | 25 Views
Affiliate Submitter: uklockpicka
Marios- Lock Bumping In the News- Part 2
Rated 0.00 | 157 Views
Affiliate Submitter: MariosLock
Marios- Lock Bumping In the News- Part 1
Rated 0.00 | 140 Views
Affiliate Submitter: MariosLock
Rated 4.05 | 523 Views
Affiliate Submitter: Keymuncher359
Mul-T-Lock 5 Pin in Pin Picked with Explan...ation
Rated 4.50 | 1,062 Views
Affiliate Submitter: Keymuncher359
Rated 4.50 | 550 Views
Affiliate Submitter: Keymuncher359
Rated 4.50 | 766 Views
Affiliate Submitter: Keymuncher359