Spyder Imagine Problem Help!

puta duracell in it. Sounds like you have a bad battery. If that bont work then its your board.

i have a question where can u buy the 9.6v battery and the charger ??????

If you're still having the problem, than try changing your battery, go to your local store and ask if you can try out a new 9.6v battery.

mine idk how to change from fully auto semi and all thati have the three lights on then i hit the button nuthin happensi pull the trigger 2 lights go oni hit the button it goes to three wtf

check out my video response. i take it apart.
-thanks

i had the exact same problem what i needed to do is to go to a local paintball store buy a new spring to check if u even have a spring take out the bolt thing in the back of the gun and pull all the stuff out. another thing i needed to was to just change the battery completely get a regular non rechargable 9 volt battery.....well thats what worked for me

ok i had the same problem but i just figured out why it was not doing anything check the black piece where it says e-marker on it, try to push it upwards if it does go upwards you should should shoot the gun and it should work so just tighten that piece, it worked for mine

my gun shoots it didnt before cuz i was missing parts but i got it fixed

ok,the hammer and bolt slide forward, but vary rarely. it didn't
in this video tho. and i know the little disk is in because i have taken this gun apart before, and i remember making sure it didn't fall out. i have the spring too. the bolt & hammer don't move i think because either the battery, or my board is fried.
i have the spring guide also.
why doesnt ur gun shoot?

ok dude i have the same gun but mine is blue and the gun doesnt shoot if u r missing parts ok now u can go to a paintball store and get a spring ok cuz it only does that when u dont have a spring cuz there is no force on the hammer and bolt to move it get back to me after u take apart ur gun and if u take out the back end and it doesnt have force pushing it up ur missing the spring and if u dont have the spring u prob dont have the flat disk or spring guide get back to me when u can

thanks dude. im pretty sure the hammer goes releases whe u hit the trigger. like all the paing ball guns i have do that but im not sure.
-thanks

I'm pretty sure it doesn't have enough charge. And when you mention that the hammer doesn't go up or something, it should only do that when you run out of CO2.
I'm not positive but my bro and I both have a Spyder Imagine and from my experiences with it... well it just seems like it's not charged properly.