#73 - VSPB Cell Chamber Construction

One question
between every 2 contacts to supply power, there are 5 steel plates. What is their potential, I mean, what are they connected to? do you use neutral plates?

This guy uses stainless steel pipes

youtube . com/user/daddyo44907

Is the piping heat proof ?

At what temp will the water be?

A long cable (zip) tie snugged up around the pipe at one mark will almost go perfect for a mark too and you can check the measurment and adjust then use the tie like you did as pencil or marker guide. Take the tie off and cut. You can get unlockable long ties as well and reuse them. When I do PVC for sewer I have a wood V I use and put my 7" saw at the mark and once into the pipe I simply spin. Rare to get an odd cut.

There are two SCH40 types, one is solid and one is foam core. Get the heavier and harder solid, not the foam core. Foam core is great for drains, terrible for containment of a hot cell. ABS foam core does work though but it's good to like 180 degrees where PVC is 150 or 130 for foam core.

Zero - Lowes sells 24" lengths also. Good way to cut is mark first. Find something that cradles or V's the pipe and has a fixed stop then hold a pencil in place and turn while making a mark. Should be square

I knew they cut wood panels for free. Didn't know about the pipe. Thanks for the tip!

Home depot has a pipe cutting machine, they do it free and gives a perfect straight line cut, or use a 6" ABS pipe cutter wheel.

It that schedule 40 PVC? I went to Lowes today to buy my setup but I would like to verify that you used schedule 40 for the body.

Thanks

Bill

ok get it wet

is it 1 +, 5 nutral, 1 -, 5 nutral 1 +, 5 nutral, 1 -? or plz specify what your plates polarities are? it could be +--+ or so on. plz specify, thank you

Why just buy a cheap 10" circular saw from HD or Harbor Freight

a little trick on getting it to cure faster... CPU FAN.... :-)

how did you connect the negative plates together? I only see two and the five on eigther side seem to be not touching anything. I must have missed that video.
Excellent videos

Avail at both lowes and home depot in the sewer pipe secrion.

Great looking cell! Can't wait too see it in action.
A miter saw with a wood blade(perferibly with a fine tooth blade) will cut that pipe perfectly and fast.