Advanced Hydrogen Smoke from a Bone Cold Cell!

i thnk we have moved past the present bubbler design because of the massive steam/hho output of the dry cells used above 50 amps!! i still believe that a bubbler is useless after 40 amps with a dry cell!!!

I posted a video response for part one of my series on this topic.
I will have the final video showing my results today.
This might shock some of y'all. It did me.

awesome i want to see the video email me and let me know when you upload it!!!

What I am doing to figure this out is this. I am using a refractometer to measure a base of distilled water. I then will run the unit thru my CLEAN condenser and CLEAN bubbler for different time intervals and then measure the difference in the bubbler to the base.
This at least will tell me if the smoke from the tube is indeed burnt KoH gitting to the bubbler. I also have some PH tests and a laser I am going to try as well. I will have this done by weekend and post the vids up. We will find out.

some day a lab some where will figure out what this dry vapor is...

Nice dry cell. You can see the vapor but it`s not steam. I`m developing a dry cell and it does the same thing. Some who have watched my videos think the cell is too hot and producing steam but at 120F thats not hot enough for steam. Nice work

i have talked on the phone with several youtubers and they all say the same thing what is that visible dry vapor???

Yea, I tried a regular paper towel as well. If you try a mirror and hold the outlet about 1/2" away from the mirror you should (or might) see a vapor trail on the mirror but it dissipates real quick.
That is what had me confused at first. I could not collect the vapor as it dissipated as fast as it could but I could see it in the mirror.

Good luck!

get this if i put a blue paper towel over the tube it stays dry!!! i am going to make a video of this wierd other wordly event! the gas is dry!!! be blessed!

Nice video. One thing though that I am looking at on my cell is that the (gas) you see is actually water vapor mixed with HHO gas. You cannot see gas. If you place the output hose next to a mirror you most likely will see the vapor on the mirror.
Now where does this vapor come from is the question as the cell is not at the temps to produce steam. My guess so far is it is KoH being burned in the process. I am doing more research into this, but I can tell you that it is caustic to nose tissue. :)

that cell got an MMW of 7.15!!! thanks scott

that looks better than ur last one, way better. Good going - and going the right way.

500 dollars for an assembled and bench tested cell i plan to sell these units soon on ebay! i am trying to get a fair price for 6x6 316 stainless to keep the cost reasonable...be blessed!

how much u sell that for

thank you ! jd.. be blessed my friend...