THE QUEST FOR CHANGE: WE'RE ALL INVOLVED
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today on this 2010 Mini Cooper hardtop, we are going to install part number 11160 from Curt. The first step involved in this is that we need to remove the entire bumper cover to the vehicle. We will open up the hatch and there are two screws here that we need to remove. What we are going to do next is take off the rear tires, you do not have to do this, but it makes it easier to see what is going on. Next thing we need to do is get behind the fender liner here, because there are some fasteners for the bumper cover. There is one, two, three fasteners that we need to remove to gain access. :46
This wire harness going to the running lights here, this needs to come apart, push down this little button and it comes apart. Then we need to get access to this fastener right here, it is a little plastic rivet, just split it apart. You can see how the bumper cover is now separated from the rear arch. We will repeat that back over on the driver side. Still working on the fender well here, what we need to do next is unsnap this trim piece from the bumper cover. You have to push that way, and away. Then we have one screw right here that we need to undo. 1:30
On some models, like the Cooper S we will have two screws. On this regular model here, the Mini Cooper, it looks like it only has one bolt to remove right here. Now that we have all the fasteners removed, we can now remove our bumper cover. Now, we will remove this part of the bumper structure right here. Before I take the bumper structure off, we are going to release the clips that are holding the wiring to the bumper structure. This foam here has a little electrical component that fits inside here. I believe it is going to come off with the bumper structure so we will remove this component. Lets give the hitch a test fit now. It looks like the hitch sits a little high due to the heat shield here, but this bends so we can push it down as needed. At this point we need to install the hitch and the bumper cover at the same time. It is defiantly a good idea to have an extra set of hands for this. We are going to zip-tie the two pieces together to hold them in place until we get our bolts in, and then we will remove the zip ties. We have the two pieces tied together, you can see where we need to cut our foam so everything sits nicely. Lets go ahead and reinstall the bumper structure and hitch, you will need an extra set of hands to help you hold it and put everything together. 3:29
Now that we have our bumper structure loosely installed with the hitch, just by one factory bolt, we will go ahead and install the rest of the hardware. We will use a factory bolt and a conical tooth washer supplied with the hitch. Once we have the bolts snugged down, we can torque them down as specified in the instructions. We will take our wire harness and push it back into place. Take the module and put it in this little slot. Before we put our bumper cover into place we are going to show you that this senter section has to be removed for you to use the draw bar and the hitch. Now we will show you how to remove it, it is pretty simple. There are two clips here and here. You can push those in and then pop off the center section. Now we are good to go. At this point, we can reassemble the bumper cover itself. 4:25
Now that we have the vehicle off the lift, we will give you a couple measurements that will help in ing accessories for your hitch. From the ground to the top of the receiver opening is about 16 inches. From the center of the hitch pin hole, to the outside edge of the bumper is about 6 inches. With that, that will finish our install of part number 11160 from Curt on this 2010 Mini Cooper.
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today on this 2010 Ford F-150 we are going to install fifth wheel bracket kit part number V55080 from Valley. The first thing we are going to start off with is mounting the bracket to the frame of the vehicle. In this case it does not seem like we have to lower the exhaust or move the spare tire. We will show you where the bracket mounts up to the frame. It is going to be using these two existing holes in the frame and there will be a U-bolt that will be holding everything together up front and it will sit like this on the vehicle. Take it down and install the hardware and put our bracket in place. 00:33
This is our U-bolt we are going to use to install with. We are actually going to use a bolt leader that comes supplied with the kit to help hold everything in position while we put the bracket in place so we do not lose the U-bolt in the frame. Then we will take the bolt leader and thread it through the bracket and we will install our 7/ 16 flat washer, lock washer, and nut. We have got the passenger side done, lets go over to the driver side and repeat the same process. 01:03
Now we will install our bracket going towards the back of the truck on here on the passenger side. It is going to fit over the rail here. Next we will install the clamp that will hold everything in place. It is going to be this flat plate, steel, here and this hex bolt. Put on the conical tooth washer and the nylon lock nut. Then we will run our bolt on the bottom. We have got the passenger side done, we will repeat the same process back over on the driver side. Next we will start positioning the frame rails in the bed of the truck. We will start with the rail going towards the back of the vehicle and we want to measure out from the inside edge of the bed itself to this edge of the bed rail itself. Once you have the distance measured per the instructions we will center the rail left and right in the bed. 01:50
We have got our first rail marked into place. We will take our uprights for our fifth wheel hitch that will be used and we will use that to position our second rail. Then we will mark its location on the bed too. One more final check and then we can start marking and drilling our holes through the bed. We will drill out our holes and start with 1/ 4 inch bit and we will go aiming for the center of our square hole however it is going to go right down a diagonal slope so find the center and go at an angle to be flat on the slope. Now we have got the pilot hole drilled out and follow up with a 5/ 8 drill bit. We will slide our rails back into position. The next thing we are going to do is start installing our hardware. We are going to install our block which is going to go in the arch part of the rail itself to give it support when it is tightened down. If our rail is sitting on top of the flat part, you want to use the block and that is it. If we use it on a gully like this part here we would use our block and this sitting on top of the block. 02:48
We have got our bolts installed, lets go underneath and attach some nuts and washers. On the bottom we will add our flat washer, lock washer, and nut. On the bottom, if the corrugation goes up away from the bracket then you definitely want to add another spacer around the bolt to take up that space too. Repeat this process on the other side of the rail. Then we will go towards the front of the vehicle and mark and drill our holes out again and repeat that same process. We will take one more check and make sure everything fits okay. Then we will snug down the bolts first, test again, and if it works fine we will torque the brackets to the bed rails. At this point it would be a good idea to have an extra set of hands to hold the nut on the bottom. At this point we can torque down the bolts as specified in the instructions. We will do one more check. The next thing we need to do is tighten the frame brackets to the frame itself. Now we will tighten down our U-bolts to the front bracket and do this evenly on both sides of the U-bolt. With all of our brackets tightened down, that will be the last part we need to do. There you have it for our install part number V55080 from Valley.
*******www.GreenDIYenergyScam**** If you are not sure how to go about this, you can find the right set of instructions for you by reading a good green DIY energy review. It will cover a few of the more popular methods of putting everything together yourself. Some of the manuals have ideas on how to put a solar panel together without having to buy a premade one. There might be slight variations in the manuals, and some may be more concise and easier to understand than others are.
This is the storyline.
Alex O'Malley dreams of dancing during the opening credits. She wakes up with a smile on her face, and then goes out to get the mail. Meanwhile Joe, Kevin, and Nick Lucas have just begun getting everything together after coming back from a fun but tiring summer tour. The next day Alex and her friend Tammy go through school and see that not much has changed. Alex sees her friends and laughs because Joe is telling a funny joke. Skipping to Saturday, Chad and Sonny have a date which turns out to be more fun than they expected. If only Alex and Justin Russo were the same as they were. Alex is feeling too overwhelmed with her life and thinks that breaking up with Justin is the best thing to do. So she does. Justin is confused and heartbroken as she leaves. Alex is determined to get over Justin, so she and Tammy go to prom. They see everyone dancing so Alex decides to dance as well with a mysterious masked dancer...
A year later, life is good! ( I had to change it, because Troy & Gabby can't be in college THAT fast). For the most part that is. Gabriella's sending Troy love notes in their college class, Gabriella accepts Troy’s marriage proposal, and Michelle, Alex, and Sonny are loving life. Alex's dancing spark has come back again. Unfortunately nothing really lasts forever. Nick is caught between his two good friends Sonny and Chad who are fighting like crazy these days and Stella is angry with him as well. Alex sees Stella and Nick from the stairs and feels sorry for him, because he’s her friend too. Nick is frustrated with having to pick sides as shown in the next scene.
The next night Sonny and Chad go for a drive (my attempt, lol) to try and pick up the pieces of their relationship.
That's all for now. The other part I had to cut in half because the entire thing is over ten minutes.
So stay tuned!
Program used: Sony Vegas 7
"Dirty Terrestrial" is a mashup of Michael Jackson's "Dirty Diana" from Bad (1987) and Katy Perry's "ET" from Teenage Dream (2011). The emerging story from these two songs works well. I used the Jacksons' 2005 hit "Scream" to tie everything together visually.
The idea to merge these two songs came solely from thinking that they would work well together musically and lyrically after listening to some of Michael Jackson's albums recently. Katy Perry's potential fifth top hit from a single album (to tie the record held by Michael Jackson) is completely coincidental and had no bearing on the mashup.
The intro to this video is a narration by Michael Jackson, recorded in 1981 for a children's audio book (vinyl record) entitled "E.T. The Extra-Terrestrial (album)."
This music and video is a derivative work, a legitimate form of original art under "fair use" laws.
*******whiteningteeth.virtual35**** - best at home teeth whitening - teeth whitening bleach
How Can You Get "Whitening Teeth Secrets" Now?
The thing is that I spent at least 500 hours
putting everything together and I spent
thousands of dollars with all the experiments
For this reason and because I want you to
perceive this as extremely valuable for the
health of your teeth, I'll provide you with
more than a fair price!
You can have everything: the main ebook, the
3 videos (more than an hour and a half), plus
the recourses pdf at the incredible price of
This is a small investment considering how much
best at home teeth whitening - teeth whitening bleach
Kids and food equals some kind of mess most of the time, and it seems the smaller the kid, the bigger the mess. Gyro Bowl is a neat invention, a kid proof, spill proof bowl that keeps food where it belongs instead of on the floor, carpet, counter, table, or on your kid. Gyro Bowl even comes with a stay-fresh lid to save the rest for later.
Gyro bowl can be picked up, tilted, dropped, and turned upside down without spilling. The Gyro Bowl keeps everything together. It’s great for parties with dips and chips too. Gyro Bowl can be used in the car, at picnics, at the beach and barbeques. It’s durable plastic construction is safe and dishwasher safe as well.
*******www.FTV****/videos | I LOVE FTV | RIO DE JANEIRO - FashionTV captures the models of the Melk Z-Da show in a hurry as they're getting everything together before the runway display. FashionTV brings you the newest hair and makeup trends backstage from the world’s major Fashion Weeks. See more Fashion TV at *******www.FTV****
Watch the full video here - *******tinyurl****/pragwrks396
See how can you use PowerShell to get login information and work work with SQL Authentication. See how to create a SQL Authenticated Drive, changing SQL Users passwords, use .NET autogenerated password class, and finally putting everything together create quick script solution to change Admin "SA" password on all SQL Servers.
Making Business Intelligent - *******pragmaticworks****/
SEMI-CHARMED © : Episode 12. Charlie's newest best friend is a little red balloon. They play and laugh and do everything together, until one day, one balloon just isn't enough. Charlie wants more balloons. More balloons mean more fun for Charlie! Too bad he goes over board and the balloons get angry at his balloon abuse, and come after him!
Can the little red balloon save him before the black balloons destroy Charlie?
Andy Brosseau as Charlie Lusinger
Produced, Written, Directed, Shot & Edited by
All rights reserved.
1- Nail In Head on Morgana
2- naoto2222 on Lux
3- LolCakeJuice on Pantheon
4- 4epToBc4uHa on Nunu
5- BobTheAllMighty on Lee Sin
PC Winner- TheBasedSwagGod on Janna
~Check out *******www.solomid****/ for some sweet guides made by some of the best League of Legends players alive.
~Please send your League of Legend Replays to *******www.protatomonster****/submit.php for a chance to be in our video of the week in the future.
~We give away Razer equipment to our #1 top 5 winner and to a random subscriber weekly for more information watch Fries Prize *******www.youtube****/playlist?list=PL9FF6403D168C4432&feature=viewall
~~ Also if you can leave a comment/feedback on *******www.leagueoflegends****/board/showthread.php?t=864753
Every comment that goes up puts the post on the front page and it will rocket our video! Please post anything or any suggestions or even saying awesome video or whatever you'd like :) It would help a ton!
Players choice voting will be on our website *******www.protatomonster****! Be sure to look out for it and our players choice clip will be in our next Friday's video!
Videos come out every Tuesday and Friday so be sure to check out each episode! :)
~Sign up for league of legends at *******signup.leagueoflegends****/?ref=4de9ac1e0f8d2343455063
Where can I submit a replay?
You can use our form on our website *******www.protatomonster****/submit.php
Do I send in the whole replay?
Yes, send in the whole replay and we'll do the rest. If you're sending in a pre-recorded file, then just send us just the part you want us to look at.
It says a champions spell was on cooldown, yet they used it?
It's a common bug with LoL replay. It's caused by the fast forward feature. Cooldowns don't register that the time has been sped up, which is why you'll see many plays in our videos in which don't have correct cooldown timers.
How do I record my games?
There are several different ways to do this. Fraps allows you to record anything that's on your screen. Just open up your replay through LoL Replay, and record it with Fraps. You can also use Camtasia Studio, but you can only use the trial version unless you pay for it.
How do you change the camera angle?
You can change the camera angle in LoL Replay by right clicking and dragging your mouse up or down.
What programs do you use to make your videos?
For the effects, we use Adobe After Effects and to composite everything together, we use Adobe Premiere.
How will I receive the $25/$10 worth of RP?
We'll send you a code for a paysafe card worth the amount you won. You'll be able to redeem the money value via the League of Legends store as well as any other game that accepts paysafe cards.
Chillout Music! Sit back and....chill....out....to a track called "Simmer" by Made of Wood. Available for free download at *******made-of-wood.bandcamp****/album/free-downloads. For more chillout music, lounge music, acid jazz and downtempo funky goodness, visit: *******www.madeofwoodmusic**** Some reviews of the latest Made of Wood album: "This is chill out at its best. Absolutely LUSH!" - GloPop (Jun 21, 2012) "This album does a perfect job of blending everything together to make an original work of musical art. " - Mind Inversion (Feb 10, 2012) " Prepare yourself for a freaky good time." - Tour de Vaap (Apr 22, 2012)