Results for: s71 Search Results
Family Filter:
8:45
Our 1971 Oldsmobile "S71" project is powered by a turbocharged Olds V8 that is capable of making some serious power. The stock 10-bolt rear axle assembly was never intended to handle this kind of load, so we chose to run a unit that can take the power - a Currie 9+ rear end. In this video, we explain the thought process behind our decision and the reasons why the 9+ is a suitable choice for this car.
3 Jan 2013
240
Share Video

2:47
The S71 Olds made the cover of this month's Popular Hot Rodding Magazine ! There's also a full color feature inside. We are really honored to have one of our creations featured in this special issue, along side of some of the coolest cars from the SEMA show built by the best in the biz. One thing we'd like to point out is that the engine was built by Bill Trovato at BTR Performance (Not Kevin as the mag states, so give him a call if you want your own screaming Olds engine) and they transposed the name to SR71 from S71, but it's all good. We're very proud of the car and our crew, and can't thank our friends at Popular Hot Rodding enough for the coverage! Now go buy a copy for yourself... there are TONS of killer cars in this issue! Contact the V8 Speed & Resto Shop today to learn how we can build YOUR dream car!
22 Jan 2013
349
Share Video

5:49
In this 2-part video series, we're applying the final paint, stripes, and clear coat on the S71 Olds project. The car had been painted with all the panels disassembled and the jamb areas clear coated, but we like to re-assemble the car and give it several coats of color to be sure that the color and metallic pattern match from panel to panel. We're also using FBS stripe tapes to lay out the DuPont Hot Hues Snowstorm white stripes under the Warp Speed Blue. The final steps are to wetsand and buff the clear to bring out the mirror smooth finish and deep shine!
19 Jun 2013
384
Share Video

5:49
In this 2-part video series, we're applying the final paint, stripes, and clear coat on the S71 Olds project. The car had been painted with all the panels disassembled and the jamb areas clear coated, but we like to re-assemble the car and give it several coats of color to be sure that the color and metallic pattern match from panel to panel. We're also using FBS stripe tapes to lay out the DuPont Hot Hues Snowstorm white stripes under the Warp Speed Blue. The final steps are to wetsand and buff the clear to bring out the mirror smooth finish and deep shine!
19 Jun 2013
458
Share Video

9:02
This is the third in a multi-part series covering the custom 422 cubic-inch stroker engine build performed by master engine builder Bill Trovato at BTR Performance for our turbocharged 1971 Olds project called the "S71". In this installment, Trovato discusses rear main seals and installing JE pistons onto Lunati H-Beam connecting rods using spiral locks. Although this video series features and Olds engine, the valuable, race-proven techniques shown by Trovato apply to any performance engine build.
26 Jun 2010
323
Share Video

8:58
This is part 5 in a multi-part series covering the custom 422 cubic-inch stroker engine build performed by master engine builder Bill Trovato at BTR Performance for our turbocharged 1971 Olds project called the "S71". This time, Trovato installs the custom grind Comp camshaft and Edelbrock aluminum cylinder heads. Although this video series features and Olds engine, the valuable, race-proven techniques shown by Trovato apply to any performance engine build.
2 Jul 2010
669
Share Video

9:17
This is part 7 in a multi-part series covering the custom 422 cubic-inch stroker engine build performed by master engine builder Bill Trovato at BTR Performance for our turbocharged 1971 Olds project called the "S71". This time, Trovato installs the roller lifters, Comp Cams pushrods and rocker arms, and shows us how to adjust them. Although this video series features and Olds engine, the valuable, race-proven techniques shown by Trovato apply to any performance engine build.
13 Jul 2010
471
Share Video

4:49
This is part 8 in a multi-part series covering the custom 422 cubic-inch stroker engine build performed by master engine builder Bill Trovato at BTR Performancefor our turbocharged 1971 Olds project called the "S71". This video outlines the choice of the Edelbrock intake manifold and the installation of the FAST fuel injectors and rails. Although this video series features and Olds engine, the valuable, race-proven techniques shown by Trovato apply to any performance engine build.
17 Jul 2010
479
Share Video

9:50
This is part 9 in a multi-part series covering the custom 422 cubic-inch stroker engine build performed by master engine builder Bill Trovato at BTR Performance for our turbocharged 1971 Olds project called the "S71". In this chapter, Trovato takes us through the process of installing the MSD Pro-Billet distributor that has been modified by FAST to work with the FAST XFI fuel injection system. Although this video series features and Olds engine, the valuable, race-proven techniques shown by Trovato apply to any performance engine build.
27 Jul 2010
210
Share Video

7:50
In this chapter of our S71 Olds build, we are completing the install of our Bullseye Power 75 mm turbo, our fabricated turbo piping, Bell intercooler , and the Be Cool Radiator . All of the exhaust tubing and turbine housing parts were coated by Extreme Powder Coating using their 2200° high temperature black ceramic coating to keep them looking new. The charge air tubing was painted with Eastwood's high temperature Nano Ceramic engine paint, which is a very durable paint suitable for parts reaching regular engine temperatures. The be cool radiator module encompasses a pair of Spal electric fans, and Be Cool guarantees it to cool engines up to 1000 HP. We installed a Turbo Smart Reaceport blow-off valve inline with the air intake to help keep the turbo spooled-up during shifts. To help reduce underhood air temperatures and to make our turbo system more efficient, we installed a DEI Titanium Turbo Shield , which is made from lava rock strands that can withstand temperatures over 1800°. We also wrapped our turbo exhaust with DEI Titanium Exhaust Wrap to keep the hot exhaust gas in the tubing and underhood temperatures down. A K & N air filter and various silicone connectors from IntakeHoses**** completed the intake tubing. In the coming chapters, we will complete the ISIS Intelligent Multiplex wiring system install and FAST Fuel Injection installs before firing up the S71 Olds!
17 Aug 2011
273
Share Video

1:37
M D Car Sales Wakefield Road, Barnsley, South Yorkshire S71 1NU 01226 786213 ‎ *******www.mdcarlot******
20 Sep 2011
258
Share Video

0:34
ARC Car Wash & Valeting Services Wakefield Road, Barnsley, South Yorkshire S71 1NU 01226 733730 ‎ asapvaletingco******
20 Sep 2011
289
Share Video

9:28
The right wheels are often hard to pick for a car, especially when you consider the proper sizing, fitment, strength and safety aspects. We are running a set of Weld Racing S71 wheels on our Olds "S71", and not just because they share the same name. Here, we chat with Kyle Fickler about all these aspects and how Weld Racing approaches each wheel as a custom part.
9 Nov 2012
332
Share Video

0:53
Avris sell the perfect luxury gifts for men and women, from jewellery to beauty products such as organic cocoa butter, shea butter, brands like arran aromatics & more 36 Applehaigh View Royston Barnsley S71 4HR Tel No : 01226 725358 *******www.avris******/
12 Nov 2012
408
Share Video

0:46
Avris sell the perfect luxury gifts for men and women, from jewellery to beauty products such as organic cocoa butter, shea butter, brands like arran aromatics & more 36 Applehaigh View Royston Barnsley S71 4HR Tel No : 01226 725358 *******www.avris******/
12 Nov 2012
392
Share Video