Homemade Rocket Pistol

  • Share
    Share Video

  • Add
  • More
    Report this video as:
0 0
You have already voted for this video.
PLEASE READ: i used gorrilla tape and taped a rod from LOWE'S, that fits the mini rockets that i got from w...
PLEASE READ: i used gorrilla tape and taped a rod from LOWE'S, that fits the mini rockets that i got from wal-mart, that uses AT-10 model rocket engines. i taped the rod to a rubber band gun and drilled a hole an inch above dead center of a square sheet of LEXAN and used it as a shield from the hot gases from the rocket, and used a safety fuse in the back and jammed a small piece of paper in the hole to keep the fuse in, you can also just use the launch pad that you should use to launch rocket with, they can be bought in a kit at wal-mart. You can see the launch, but you can't see the rocket very well after it leaves the platform, but it went all the way down that grassy road and to the trees. i will be releasing a lot more rocket related stuff in the future. if you like this, subscribe to me, because i have a lot more where that came from!
Categories:
Related